| /* |
| * Copyright (C) 2009 The Android Open Source Project |
| * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved. |
| * Not a Contribution, Apache license notifications and license are retained |
| * for attribution purposes only. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "AudioPolicyManager7x30" |
| //#define LOG_NDDEBUG 0 |
| |
| //#define VERY_VERBOSE_LOGGING |
| #ifdef VERY_VERBOSE_LOGGING |
| #define ALOGVV ALOGV |
| #else |
| #define ALOGVV(a...) do { } while(0) |
| #endif |
| |
| // A device mask for all audio input devices that are considered "virtual" when evaluating |
| // active inputs in getActiveInput() |
| #define APM_AUDIO_IN_DEVICE_VIRTUAL_ALL AUDIO_DEVICE_IN_REMOTE_SUBMIX |
| |
| #include <utils/Log.h> |
| #include "AudioPolicyManager.h" |
| #include <hardware/audio_effect.h> |
| #include <media/mediarecorder.h> |
| #include <hardware/audio.h> |
| #include <math.h> |
| #include <hardware_legacy/audio_policy_conf.h> |
| |
| namespace android_audio_legacy { |
| |
| |
| |
| // ---------------------------------------------------------------------------- |
| // AudioPolicyManager for msm7x30 platform |
| // ---------------------------------------------------------------------------- |
| audio_devices_t AudioPolicyManager::getDeviceForStrategy(routing_strategy strategy, bool fromCache) |
| { |
| uint32_t device = 0; |
| |
| if (fromCache) { |
| ALOGV("getDeviceForStrategy() from cache strategy %d, device %x", |
| strategy, mDeviceForStrategy[strategy]); |
| return mDeviceForStrategy[strategy]; |
| } |
| |
| switch (strategy) { |
| |
| case STRATEGY_SONIFICATION_RESPECTFUL: |
| if (isInCall()) { |
| device = getDeviceForStrategy(STRATEGY_SONIFICATION, false /*fromCache*/); |
| } else if (isStreamActive(AudioSystem::MUSIC, SONIFICATION_RESPECTFUL_AFTER_MUSIC_DELAY)) { |
| // while media is playing (or has recently played), use the same device |
| device = getDeviceForStrategy(STRATEGY_MEDIA, false /*fromCache*/); |
| } else { |
| // when media is not playing anymore, fall back on the sonification behavior |
| device = getDeviceForStrategy(STRATEGY_SONIFICATION, false /*fromCache*/); |
| } |
| |
| break; |
| |
| case STRATEGY_DTMF: |
| if (!isInCall()) { |
| // when off call, DTMF strategy follows the same rules as MEDIA strategy |
| device = getDeviceForStrategy(STRATEGY_MEDIA, false /*fromCache*/); |
| break; |
| } |
| // when in call, DTMF and PHONE strategies follow the same rules |
| // FALL THROUGH |
| |
| case STRATEGY_PHONE: |
| // for phone strategy, we first consider the forced use and then the available devices by order |
| // of priority |
| switch (mForceUse[AudioSystem::FOR_COMMUNICATION]) { |
| case AudioSystem::FORCE_BT_SCO: |
| if (!isInCall() || strategy != STRATEGY_DTMF) { |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_SCO_CARKIT; |
| if (device) break; |
| } |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_SCO_HEADSET; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_SCO; |
| if (device) break; |
| // if SCO device is requested but no SCO device is available, fall back to default case |
| // FALL THROUGH |
| |
| default: // FORCE_NONE |
| // when not in a phone call, phone strategy should route STREAM_VOICE_CALL to A2DP |
| if (mHasA2dp && !isInCall() && |
| (mForceUse[AudioSystem::FOR_MEDIA] != AudioSystem::FORCE_NO_BT_A2DP) && |
| (getA2dpOutput() != 0) && !mA2dpSuspended) { |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_A2DP; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES; |
| if (device) break; |
| } |
| |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_WIRED_HEADPHONE; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_WIRED_HEADSET; |
| if (device) break; |
| device = mAvailableOutputDevices & AUDIO_DEVICE_OUT_USB_ACCESSORY; |
| if (device) break; |
| device = mAvailableOutputDevices & AUDIO_DEVICE_OUT_USB_DEVICE; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_DGTL_DOCK_HEADSET; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_AUX_DIGITAL; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_ANLG_DOCK_HEADSET; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_EARPIECE; |
| if (device) break; |
| device = mDefaultOutputDevice; |
| if (device == 0) { |
| ALOGE("getDeviceForStrategy() no device found for STRATEGY_PHONE"); |
| } |
| break; |
| |
| case AudioSystem::FORCE_SPEAKER: |
| // when not in a phone call, phone strategy should route STREAM_VOICE_CALL to |
| // A2DP speaker when forcing to speaker output |
| if (mHasA2dp && !isInCall() && |
| (mForceUse[AudioSystem::FOR_MEDIA] != AudioSystem::FORCE_NO_BT_A2DP) && |
| (getA2dpOutput() != 0) && !mA2dpSuspended) { |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER; |
| if (device) break; |
| } |
| device = mAvailableOutputDevices & AUDIO_DEVICE_OUT_USB_ACCESSORY; |
| if (device) break; |
| device = mAvailableOutputDevices & AUDIO_DEVICE_OUT_USB_DEVICE; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_DGTL_DOCK_HEADSET; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_AUX_DIGITAL; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_ANLG_DOCK_HEADSET; |
| if (device) break; |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_SPEAKER; |
| if (device) break; |
| device = mDefaultOutputDevice; |
| if (device == 0) { |
| ALOGE("getDeviceForStrategy() no device found for STRATEGY_PHONE, FORCE_SPEAKER"); |
| } |
| break; |
| } |
| #ifdef QCOM_FM_ENABLED |
| if (mAvailableOutputDevices & AudioSystem::DEVICE_OUT_FM) { |
| device |= AudioSystem::DEVICE_OUT_FM; |
| if (mForceUse[AudioSystem::FOR_MEDIA] == AudioSystem::FORCE_SPEAKER) { |
| device &= ~(AudioSystem::DEVICE_OUT_WIRED_HEADSET); |
| device |= AudioSystem::DEVICE_OUT_SPEAKER; |
| } |
| } |
| #endif |
| break; |
| |
| case STRATEGY_SONIFICATION: |
| |
| // If incall, just select the STRATEGY_PHONE device: The rest of the behavior is handled by |
| // handleIncallSonification(). |
| if (isInCall()) { |
| device = getDeviceForStrategy(STRATEGY_PHONE, false /*fromCache*/); |
| break; |
| } |
| // FALL THROUGH |
| |
| case STRATEGY_ENFORCED_AUDIBLE: |
| // strategy STRATEGY_ENFORCED_AUDIBLE uses same routing policy as STRATEGY_SONIFICATION |
| // except: |
| // - when in call where it doesn't default to STRATEGY_PHONE behavior |
| // - in countries where not enforced in which case it follows STRATEGY_MEDIA |
| |
| if (strategy == STRATEGY_SONIFICATION || |
| !mStreams[AUDIO_STREAM_ENFORCED_AUDIBLE].mCanBeMuted) { |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_SPEAKER; |
| if (device == 0) { |
| ALOGE("getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION"); |
| } |
| } |
| // The second device used for sonification is the same as the device used by media strategy |
| // FALL THROUGH |
| |
| case STRATEGY_MEDIA: { |
| //To route FM stream to speaker when headset is connected, a new switch case is added. |
| //case AudioSystem::FORCE_SPEAKER for STRATEGY_MEDIA will come only when we need to route |
| //FM stream to speaker. |
| switch (mForceUse[AudioSystem::FOR_MEDIA]) { |
| default:{ |
| uint32_t device2 = 0; |
| if ((mHasA2dp && (mForceUse[AudioSystem::FOR_MEDIA] != AudioSystem::FORCE_NO_BT_A2DP) && |
| (getA2dpOutput() != 0) && !mA2dpSuspended )) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_A2DP; |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES; |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER; |
| } |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_WIRED_HEADPHONE; |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_WIRED_HEADSET; |
| } |
| #ifdef QCOM_FM_ENABLED |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_FM_TX; |
| } |
| #endif |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AUDIO_DEVICE_OUT_USB_ACCESSORY; |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AUDIO_DEVICE_OUT_USB_DEVICE; |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_DGTL_DOCK_HEADSET; |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_AUX_DIGITAL; |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_ANLG_DOCK_HEADSET; |
| } |
| if (device2 == 0) { |
| device2 = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_SPEAKER; |
| } |
| |
| // device is DEVICE_OUT_SPEAKER if we come from case STRATEGY_SONIFICATION or |
| // STRATEGY_ENFORCED_AUDIBLE, 0 otherwise |
| device |= device2; |
| if (device) break; |
| device = mDefaultOutputDevice; |
| } |
| break; |
| |
| case AudioSystem::FORCE_SPEAKER: |
| device = mAvailableOutputDevices & AudioSystem::DEVICE_OUT_SPEAKER; |
| break; |
| } |
| #ifdef QCOM_FM_ENABLED |
| if (mAvailableOutputDevices & AudioSystem::DEVICE_OUT_FM) { |
| device |= AudioSystem::DEVICE_OUT_FM; |
| } |
| #endif |
| // Do not play media stream if in call and the requested device would change the hardware |
| // output routing |
| if (mPhoneState == AudioSystem::MODE_IN_CALL && |
| !AudioSystem::isA2dpDevice((AudioSystem::audio_devices)device) && |
| device != getDeviceForStrategy(STRATEGY_PHONE)) { |
| device = getDeviceForStrategy(STRATEGY_PHONE); |
| ALOGV("getDeviceForStrategy() incompatible media and phone devices"); |
| } |
| } break; |
| |
| default: |
| ALOGW("getDeviceForStrategy() unknown strategy: %d", strategy); |
| break; |
| } |
| |
| ALOGVV("getDeviceForStrategy() strategy %d, device %x", strategy, device); |
| |
| return (audio_devices_t)device; |
| } |
| |
| status_t AudioPolicyManager::setDeviceConnectionState(audio_devices_t device, |
| AudioSystem::device_connection_state state, |
| const char *device_address) |
| { |
| SortedVector <audio_io_handle_t> outputs; |
| |
| ALOGV("setDeviceConnectionState() device: %x, state %d, address %s", device, state, device_address); |
| |
| // connect/disconnect only 1 device at a time |
| if (!audio_is_output_device(device) && !audio_is_input_device(device)) return BAD_VALUE; |
| |
| if (strlen(device_address) >= MAX_DEVICE_ADDRESS_LEN) { |
| ALOGE("setDeviceConnectionState() invalid address: %s", device_address); |
| return BAD_VALUE; |
| } |
| |
| // handle output devices |
| if (audio_is_output_device(device)) { |
| |
| if (!mHasA2dp && audio_is_a2dp_device(device)) { |
| ALOGE("setDeviceConnectionState() invalid A2DP device: %x", device); |
| return BAD_VALUE; |
| } |
| if (!mHasUsb && audio_is_usb_device(device)) { |
| ALOGE("setDeviceConnectionState() invalid USB audio device: %x", device); |
| return BAD_VALUE; |
| } |
| if (!mHasRemoteSubmix && audio_is_remote_submix_device((audio_devices_t)device)) { |
| ALOGE("setDeviceConnectionState() invalid remote submix audio device: %x", device); |
| return BAD_VALUE; |
| } |
| |
| // save a copy of the opened output descriptors before any output is opened or closed |
| // by checkOutputsForDevice(). This will be needed by checkOutputForAllStrategies() |
| mPreviousOutputs = mOutputs; |
| switch (state) |
| { |
| // handle output device connection |
| case AudioSystem::DEVICE_STATE_AVAILABLE: |
| |
| if (mAvailableOutputDevices & device) { |
| ALOGW("setDeviceConnectionState() device already connected: %x", device); |
| return INVALID_OPERATION; |
| } |
| ALOGV("setDeviceConnectionState() connecting device %x", device); |
| |
| if (checkOutputsForDevice(device, state, outputs) != NO_ERROR) { |
| return INVALID_OPERATION; |
| } |
| ALOGV("setDeviceConnectionState() checkOutputsForDevice() returned %d outputs", |
| outputs.size()); |
| // register new device as available |
| mAvailableOutputDevices = (audio_devices_t)(mAvailableOutputDevices | device); |
| ALOGV("setDeviceConnectionState() connecting device %x", mAvailableOutputDevices); |
| |
| if (!outputs.isEmpty()) { |
| String8 paramStr; |
| if (mHasA2dp && audio_is_a2dp_device(device)) { |
| // handle A2DP device connection |
| AudioParameter param; |
| param.add(String8(AUDIO_PARAMETER_A2DP_SINK_ADDRESS), String8(device_address)); |
| paramStr = param.toString(); |
| mA2dpDeviceAddress = String8(device_address, MAX_DEVICE_ADDRESS_LEN); |
| mA2dpSuspended = false; |
| } else if (audio_is_bluetooth_sco_device(device)) { |
| // handle SCO device connection |
| mScoDeviceAddress = String8(device_address, MAX_DEVICE_ADDRESS_LEN); |
| } else if (mHasUsb && audio_is_usb_device(device)) { |
| // handle USB device connection |
| mUsbCardAndDevice = String8(device_address, MAX_DEVICE_ADDRESS_LEN); |
| paramStr = mUsbCardAndDevice; |
| } |
| if (!paramStr.isEmpty()) { |
| for (size_t i = 0; i < outputs.size(); i++) { |
| mpClientInterface->setParameters(outputs[i], paramStr); |
| } |
| } |
| } |
| break; |
| // handle output device disconnection |
| case AudioSystem::DEVICE_STATE_UNAVAILABLE: { |
| if (!(mAvailableOutputDevices & device)) { |
| ALOGW("setDeviceConnectionState() device not connected: %x", device); |
| return INVALID_OPERATION; |
| } |
| |
| ALOGV("setDeviceConnectionState() disconnecting device %x", device); |
| // remove device from available output devices |
| mAvailableOutputDevices = (audio_devices_t)(mAvailableOutputDevices & ~device); |
| |
| checkOutputsForDevice(device, state, outputs); |
| if (mHasA2dp && audio_is_a2dp_device(device)) { |
| // handle A2DP device disconnection |
| mA2dpDeviceAddress = ""; |
| mA2dpSuspended = false; |
| } else if (audio_is_bluetooth_sco_device(device)) { |
| // handle SCO device disconnection |
| mScoDeviceAddress = ""; |
| } else if (mHasUsb && audio_is_usb_device(device)) { |
| // handle USB device disconnection |
| mUsbCardAndDevice = ""; |
| } |
| } break; |
| |
| default: |
| ALOGE("setDeviceConnectionState() invalid state: %x", state); |
| return BAD_VALUE; |
| } |
| #ifdef QCOM_FM_ENABLED |
| |
| audio_devices_t NewDevice = AudioPolicyManagerBase::getNewDevice(mPrimaryOutput, false /*fromCache*/); |
| if (device == AudioSystem::DEVICE_OUT_FM) { |
| if (state == AudioSystem::DEVICE_STATE_AVAILABLE) { |
| mOutputs.valueFor(mPrimaryOutput)->changeRefCount(AudioSystem::FM, 1); |
| } |
| else { |
| mOutputs.valueFor(mPrimaryOutput)->changeRefCount(AudioSystem::FM, -1); |
| } |
| } |
| #endif |
| checkA2dpSuspend(); |
| AudioPolicyManagerBase::checkOutputForAllStrategies(); |
| // outputs must be closed after checkOutputForAllStrategies() is executed |
| if (!outputs.isEmpty()) { |
| for (size_t i = 0; i < outputs.size(); i++) { |
| // close unused outputs after device disconnection or direct outputs that have been |
| if (state == AudioSystem::DEVICE_STATE_UNAVAILABLE){ |
| closeOutput(outputs[i]); |
| } |
| } |
| } |
| |
| updateDevicesAndOutputs(); |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| setOutputDevice(mOutputs.keyAt(i), |
| getNewDevice(mOutputs.keyAt(i), true /*fromCache*/), |
| true, |
| 0); |
| } |
| |
| if (device == AUDIO_DEVICE_OUT_WIRED_HEADSET) { |
| device = AUDIO_DEVICE_IN_WIRED_HEADSET; |
| } else if (device == AUDIO_DEVICE_OUT_BLUETOOTH_SCO || |
| device == AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET || |
| device == AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT) { |
| device = AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET; |
| } else { |
| return NO_ERROR; |
| } |
| } |
| // handle input devices |
| if (audio_is_input_device(device)) { |
| |
| switch (state) |
| { |
| // handle input device connection |
| case AudioSystem::DEVICE_STATE_AVAILABLE: { |
| if (mAvailableInputDevices & device) { |
| ALOGW("setDeviceConnectionState() device already connected: %d", device); |
| return INVALID_OPERATION; |
| } |
| mAvailableInputDevices = mAvailableInputDevices | (device & ~AUDIO_DEVICE_BIT_IN); |
| } |
| break; |
| |
| // handle input device disconnection |
| case AudioSystem::DEVICE_STATE_UNAVAILABLE: { |
| if (!(mAvailableInputDevices & device)) { |
| ALOGW("setDeviceConnectionState() device not connected: %d", device); |
| return INVALID_OPERATION; |
| } |
| mAvailableInputDevices = (audio_devices_t) (mAvailableInputDevices & ~device); |
| } break; |
| |
| default: |
| ALOGE("setDeviceConnectionState() invalid state: %x", state); |
| return BAD_VALUE; |
| } |
| |
| audio_io_handle_t activeInput = getActiveInput(); |
| if (activeInput != 0) { |
| AudioInputDescriptor *inputDesc = mInputs.valueFor(activeInput); |
| audio_devices_t newDevice = getDeviceForInputSource(inputDesc->mInputSource); |
| if ((newDevice != AUDIO_DEVICE_NONE) && (newDevice != inputDesc->mDevice)) { |
| ALOGV("setDeviceConnectionState() changing device from %x to %x for input %d", |
| inputDesc->mDevice, newDevice, activeInput); |
| inputDesc->mDevice = newDevice; |
| AudioParameter param = AudioParameter(); |
| param.addInt(String8(AudioParameter::keyRouting), (int)newDevice); |
| mpClientInterface->setParameters(activeInput, param.toString()); |
| } |
| } |
| |
| return NO_ERROR; |
| } |
| |
| ALOGW("setDeviceConnectionState() invalid device: %x", device); |
| return BAD_VALUE; |
| } |
| |
| AudioSystem::device_connection_state AudioPolicyManager::getDeviceConnectionState(audio_devices_t device, |
| const char *device_address) |
| { |
| AudioSystem::device_connection_state state = AudioSystem::DEVICE_STATE_UNAVAILABLE; |
| String8 address = String8(device_address); |
| if (audio_is_output_device(device)) { |
| if (device & mAvailableOutputDevices) { |
| if (audio_is_a2dp_device(device) && |
| (!mHasA2dp || (address != "" && mA2dpDeviceAddress != address))) { |
| return state; |
| } |
| if (audio_is_bluetooth_sco_device(device) && |
| address != "" && mScoDeviceAddress != address) { |
| return state; |
| } |
| if (audio_is_usb_device(device) && |
| (!mHasUsb || (address != "" && mUsbCardAndDevice != address))) { |
| ALOGE("getDeviceConnectionState() invalid device: %x", device); |
| return state; |
| } |
| if (audio_is_remote_submix_device((audio_devices_t)device) && !mHasRemoteSubmix) { |
| return state; |
| } |
| state = AudioSystem::DEVICE_STATE_AVAILABLE; |
| } |
| } else if (audio_is_input_device(device)) { |
| if (device & mAvailableInputDevices) { |
| state = AudioSystem::DEVICE_STATE_AVAILABLE; |
| } |
| } |
| |
| return state; |
| } |
| |
| void AudioPolicyManager::setForceUse(AudioSystem::force_use usage, AudioSystem::forced_config config) |
| { |
| ALOGV("setForceUse() usage %d, config %d, mPhoneState %d", usage, config, mPhoneState); |
| |
| bool forceVolumeReeval = false; |
| switch(usage) { |
| case AudioSystem::FOR_COMMUNICATION: |
| if (config != AudioSystem::FORCE_SPEAKER && config != AudioSystem::FORCE_BT_SCO && |
| config != AudioSystem::FORCE_NONE) { |
| ALOGW("setForceUse() invalid config %d for FOR_COMMUNICATION", config); |
| return; |
| } |
| forceVolumeReeval = true; |
| mForceUse[usage] = config; |
| break; |
| case AudioSystem::FOR_MEDIA: |
| if (config != AudioSystem::FORCE_HEADPHONES && config != AudioSystem::FORCE_BT_A2DP && |
| config != AudioSystem::FORCE_WIRED_ACCESSORY && |
| config != AudioSystem::FORCE_ANALOG_DOCK && |
| config != AudioSystem::FORCE_DIGITAL_DOCK && config != AudioSystem::FORCE_NONE && |
| config != AudioSystem::FORCE_NO_BT_A2DP) { |
| ALOGW("setForceUse() invalid config %d for FOR_MEDIA", config); |
| return; |
| } |
| mForceUse[usage] = config; |
| break; |
| case AudioSystem::FOR_RECORD: |
| if (config != AudioSystem::FORCE_BT_SCO && config != AudioSystem::FORCE_WIRED_ACCESSORY && |
| config != AudioSystem::FORCE_NONE) { |
| ALOGW("setForceUse() invalid config %d for FOR_RECORD", config); |
| return; |
| } |
| mForceUse[usage] = config; |
| break; |
| case AudioSystem::FOR_DOCK: |
| if (config != AudioSystem::FORCE_NONE && config != AudioSystem::FORCE_BT_CAR_DOCK && |
| config != AudioSystem::FORCE_BT_DESK_DOCK && |
| config != AudioSystem::FORCE_WIRED_ACCESSORY && |
| config != AudioSystem::FORCE_ANALOG_DOCK && |
| config != AudioSystem::FORCE_DIGITAL_DOCK) { |
| ALOGW("setForceUse() invalid config %d for FOR_DOCK", config); |
| } |
| forceVolumeReeval = true; |
| mForceUse[usage] = config; |
| break; |
| case AudioSystem::FOR_SYSTEM: |
| if (config != AudioSystem::FORCE_NONE && |
| config != AudioSystem::FORCE_SYSTEM_ENFORCED) { |
| ALOGW("setForceUse() invalid config %d for FOR_SYSTEM", config); |
| } |
| forceVolumeReeval = true; |
| mForceUse[usage] = config; |
| break; |
| default: |
| ALOGW("setForceUse() invalid usage %d", usage); |
| break; |
| } |
| |
| // check for device and output changes triggered by new force usage |
| checkA2dpSuspend(); |
| checkOutputForAllStrategies(); |
| updateDevicesAndOutputs(); |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| audio_io_handle_t output = mOutputs.keyAt(i); |
| audio_devices_t newDevice = getNewDevice(output, true /*fromCache*/); |
| setOutputDevice(output, newDevice, (newDevice != AUDIO_DEVICE_NONE)); |
| if (forceVolumeReeval && (newDevice != AUDIO_DEVICE_NONE)) { |
| applyStreamVolumes(output, newDevice, 0, true); |
| } |
| } |
| |
| audio_io_handle_t activeInput = getActiveInput(); |
| if (activeInput != 0) { |
| AudioInputDescriptor *inputDesc = mInputs.valueFor(activeInput); |
| audio_devices_t newDevice = getDeviceForInputSource(inputDesc->mInputSource); |
| if ((newDevice != AUDIO_DEVICE_NONE) && (newDevice != inputDesc->mDevice)) { |
| ALOGV("setForceUse() changing device from %x to %x for input %d", |
| inputDesc->mDevice, newDevice, activeInput); |
| inputDesc->mDevice = newDevice; |
| AudioParameter param = AudioParameter(); |
| param.addInt(String8(AudioParameter::keyRouting), (int)newDevice); |
| mpClientInterface->setParameters(activeInput, param.toString()); |
| } |
| } |
| |
| } |
| |
| |
| AudioPolicyManagerBase::IOProfile *AudioPolicyManager::getProfileForDirectOutput( |
| audio_devices_t device, |
| uint32_t samplingRate, |
| uint32_t format, |
| uint32_t channelMask, |
| audio_output_flags_t flags) |
| { |
| if( !((flags & AUDIO_OUTPUT_FLAG_LPA) || |
| (flags & AUDIO_OUTPUT_FLAG_TUNNEL)|| |
| (flags & AUDIO_OUTPUT_FLAG_VOIP_RX)) ) |
| flags = AUDIO_OUTPUT_FLAG_DIRECT; |
| |
| for (size_t i = 0; i < mHwModules.size(); i++) { |
| if (mHwModules[i]->mHandle == 0) { |
| continue; |
| } |
| for (size_t j = 0; j < mHwModules[i]->mOutputProfiles.size(); j++) { |
| AudioPolicyManagerBase::IOProfile *profile = mHwModules[i]->mOutputProfiles[j]; |
| if (isCompatibleProfile(profile, device, samplingRate, format, |
| channelMask, |
| flags)) { |
| if (mAvailableOutputDevices & profile->mSupportedDevices) { |
| return mHwModules[i]->mOutputProfiles[j]; |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| |
| |
| bool AudioPolicyManager::isCompatibleProfile(AudioPolicyManagerBase::IOProfile *profile, |
| audio_devices_t device, |
| uint32_t samplingRate, |
| uint32_t format, |
| uint32_t channelMask, |
| audio_output_flags_t flags) |
| { |
| if ((profile->mSupportedDevices & device) != device) { |
| return false; |
| } |
| if (profile->mFlags != flags) { |
| return false; |
| } |
| if (samplingRate != 0) { |
| size_t i; |
| for (i = 0; i < profile->mSamplingRates.size(); i++) |
| { |
| if (profile->mSamplingRates[i] == samplingRate) { |
| break; |
| } |
| } |
| if (i == profile->mSamplingRates.size()) { |
| return false; |
| } |
| } |
| if (format != 0) { |
| size_t i; |
| for (i = 0; i < profile->mFormats.size(); i++) |
| { |
| if (profile->mFormats[i] == format) { |
| break; |
| } |
| } |
| if (i == profile->mFormats.size()) { |
| return false; |
| } |
| } |
| if (channelMask != 0) { |
| size_t i; |
| for (i = 0; i < profile->mChannelMasks.size(); i++) |
| { |
| if (profile->mChannelMasks[i] == channelMask) { |
| break; |
| } |
| } |
| if (i == profile->mChannelMasks.size()) { |
| return false; |
| } |
| } |
| ALOGD(" profile found: device %x, flags %x, samplingrate %d,\ |
| format %x, channelMask %d", |
| device, flags, samplingRate, format, channelMask); |
| return true; |
| } |
| |
| status_t AudioPolicyManager::checkOutputsForDevice(audio_devices_t device, |
| AudioSystem::device_connection_state state, |
| SortedVector<audio_io_handle_t>& outputs) |
| { |
| AudioOutputDescriptor *desc; |
| |
| if (state == AudioSystem::DEVICE_STATE_AVAILABLE) { |
| // first list already open outputs that can be routed to this device |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| desc = mOutputs.valueAt(i); |
| if (!desc->isDuplicated() && (desc->mProfile->mSupportedDevices & device)) { |
| ALOGV("checkOutputsForDevice(): adding opened output %d", mOutputs.keyAt(i)); |
| outputs.add(mOutputs.keyAt(i)); |
| } |
| } |
| // then look for output profiles that can be routed to this device |
| SortedVector<IOProfile *> profiles; |
| for (size_t i = 0; i < mHwModules.size(); i++) |
| { |
| if (mHwModules[i]->mHandle == 0) { |
| continue; |
| } |
| for (size_t j = 0; j < mHwModules[i]->mOutputProfiles.size(); j++) |
| { |
| if (mHwModules[i]->mOutputProfiles[j]->mSupportedDevices & device) { |
| ALOGV("checkOutputsForDevice(): adding profile %d from module %d", j, i); |
| profiles.add(mHwModules[i]->mOutputProfiles[j]); |
| } |
| } |
| } |
| |
| if (profiles.isEmpty() && outputs.isEmpty()) { |
| ALOGW("checkOutputsForDevice(): No output available for device %04x", device); |
| return BAD_VALUE; |
| } |
| |
| // open outputs for matching profiles if needed. Direct outputs are also opened to |
| // query for dynamic parameters and will be closed later by setDeviceConnectionState() |
| for (ssize_t profile_index = 0; profile_index < (ssize_t)profiles.size(); profile_index++) { |
| IOProfile *profile = profiles[profile_index]; |
| |
| // nothing to do if one output is already opened for this profile |
| size_t j; |
| for (j = 0; j < mOutputs.size(); j++) { |
| desc = mOutputs.valueAt(j); |
| if (!desc->isDuplicated() && desc->mProfile == profile) { |
| break; |
| } |
| } |
| if (j != mOutputs.size()) { |
| continue; |
| } |
| |
| ALOGV("opening output for device %08x", device); |
| desc = new AudioOutputDescriptor(profile); |
| desc->mDevice = device; |
| audio_io_handle_t output = 0; |
| if (!(desc->mFlags & AUDIO_OUTPUT_FLAG_LPA || desc->mFlags & AUDIO_OUTPUT_FLAG_TUNNEL || |
| desc->mFlags & AUDIO_OUTPUT_FLAG_VOIP_RX)) { |
| output = mpClientInterface->openOutput(profile->mModule->mHandle, |
| &desc->mDevice, |
| &desc->mSamplingRate, |
| &desc->mFormat, |
| &desc->mChannelMask, |
| &desc->mLatency, |
| desc->mFlags); |
| } |
| if (output != 0) { |
| if (desc->mFlags & AUDIO_OUTPUT_FLAG_DIRECT) { |
| String8 reply; |
| char *value; |
| if (profile->mSamplingRates[0] == 0) { |
| reply = mpClientInterface->getParameters(output, |
| String8(AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES)); |
| ALOGV("checkOutputsForDevice() direct output sup sampling rates %s", |
| reply.string()); |
| value = strpbrk((char *)reply.string(), "="); |
| if (value != NULL) { |
| loadSamplingRates(value, profile); |
| } |
| } |
| if (profile->mFormats[0] == 0) { |
| reply = mpClientInterface->getParameters(output, |
| String8(AUDIO_PARAMETER_STREAM_SUP_FORMATS)); |
| ALOGV("checkOutputsForDevice() direct output sup formats %s", |
| reply.string()); |
| value = strpbrk((char *)reply.string(), "="); |
| if (value != NULL) { |
| loadFormats(value, profile); |
| } |
| } |
| if (profile->mChannelMasks[0] == 0) { |
| reply = mpClientInterface->getParameters(output, |
| String8(AUDIO_PARAMETER_STREAM_SUP_CHANNELS)); |
| ALOGV("checkOutputsForDevice() direct output sup channel masks %s", |
| reply.string()); |
| value = strpbrk((char *)reply.string(), "="); |
| if (value != NULL) { |
| loadOutChannels(value + 1, profile); |
| } |
| } |
| if (((profile->mSamplingRates[0] == 0) && |
| (profile->mSamplingRates.size() < 2)) || |
| ((profile->mFormats[0] == 0) && |
| (profile->mFormats.size() < 2)) || |
| ((profile->mFormats[0] == 0) && |
| (profile->mChannelMasks.size() < 2))) { |
| ALOGW("checkOutputsForDevice() direct output missing param"); |
| output = 0; |
| } else { |
| addOutput(output, desc); |
| } |
| } else { |
| audio_io_handle_t duplicatedOutput = 0; |
| // add output descriptor |
| addOutput(output, desc); |
| // set initial stream volume for device |
| applyStreamVolumes(output, device, 0, true); |
| |
| //TODO: configure audio effect output stage here |
| |
| // open a duplicating output thread for the new output and the primary output |
| duplicatedOutput = mpClientInterface->openDuplicateOutput(output, |
| mPrimaryOutput); |
| if (duplicatedOutput != 0) { |
| // add duplicated output descriptor |
| AudioOutputDescriptor *dupOutputDesc = new AudioOutputDescriptor(NULL); |
| dupOutputDesc->mOutput1 = mOutputs.valueFor(mPrimaryOutput); |
| dupOutputDesc->mOutput2 = mOutputs.valueFor(output); |
| dupOutputDesc->mSamplingRate = desc->mSamplingRate; |
| dupOutputDesc->mFormat = desc->mFormat; |
| dupOutputDesc->mChannelMask = desc->mChannelMask; |
| dupOutputDesc->mLatency = desc->mLatency; |
| addOutput(duplicatedOutput, dupOutputDesc); |
| applyStreamVolumes(duplicatedOutput, device, 0, true); |
| } else { |
| ALOGW("checkOutputsForDevice() could not open dup output for %d and %d", |
| mPrimaryOutput, output); |
| mpClientInterface->closeOutput(output); |
| mOutputs.removeItem(output); |
| output = 0; |
| } |
| } |
| } |
| if (output == 0) { |
| ALOGW("checkOutputsForDevice() could not open output for device %x", device); |
| delete desc; |
| profiles.removeAt(profile_index); |
| profile_index--; |
| } else { |
| outputs.add(output); |
| ALOGV("checkOutputsForDevice(): adding output %d", output); |
| } |
| } |
| |
| if (profiles.isEmpty()) { |
| ALOGW("checkOutputsForDevice(): No output available for device %04x", device); |
| return BAD_VALUE; |
| } |
| } else { |
| // check if one opened output is not needed any more after disconnecting one device |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| desc = mOutputs.valueAt(i); |
| if (!desc->isDuplicated() && |
| !(desc->mProfile->mSupportedDevices & mAvailableOutputDevices)) { |
| ALOGV("checkOutputsForDevice(): disconnecting adding output %d", mOutputs.keyAt(i)); |
| outputs.add(mOutputs.keyAt(i)); |
| } |
| } |
| for (size_t i = 0; i < mHwModules.size(); i++) |
| { |
| if (mHwModules[i]->mHandle == 0) { |
| continue; |
| } |
| for (size_t j = 0; j < mHwModules[i]->mOutputProfiles.size(); j++) |
| { |
| IOProfile *profile = mHwModules[i]->mOutputProfiles[j]; |
| if ((profile->mSupportedDevices & device) && |
| (profile->mFlags & AUDIO_OUTPUT_FLAG_DIRECT)) { |
| ALOGV("checkOutputsForDevice(): clearing direct output profile %d on module %d", |
| j, i); |
| if (profile->mSamplingRates[0] == 0) { |
| profile->mSamplingRates.clear(); |
| profile->mSamplingRates.add(0); |
| } |
| if (profile->mFormats[0] == 0) { |
| profile->mFormats.clear(); |
| profile->mFormats.add((audio_format_t)0); |
| } |
| if (profile->mChannelMasks[0] == 0) { |
| profile->mChannelMasks.clear(); |
| profile->mChannelMasks.add((audio_channel_mask_t)0); |
| } |
| } |
| } |
| } |
| } |
| return NO_ERROR; |
| } |
| status_t AudioPolicyManager::startOutput(audio_io_handle_t output, |
| AudioSystem::stream_type stream, |
| int session) |
| { |
| ALOGV("startOutput() output %d, stream %d, session %d", output, stream, session); |
| ssize_t index = mOutputs.indexOfKey(output); |
| if (index < 0) { |
| ALOGW("startOutput() unknow output %d", output); |
| return BAD_VALUE; |
| } |
| |
| AudioOutputDescriptor *outputDesc = mOutputs.valueAt(index); |
| |
| // increment usage count for this stream on the requested output: |
| // NOTE that the usage count is the same for duplicated output and hardware output which is |
| // necessary for a correct control of hardware output routing by startOutput() and stopOutput() |
| outputDesc->changeRefCount(stream, 1); |
| |
| if (outputDesc->mRefCount[stream] == 1) { |
| audio_devices_t prevDevice = outputDesc->device(); |
| audio_devices_t newDevice = AudioPolicyManagerBase::getNewDevice(output, false /*fromCache*/); |
| routing_strategy strategy = AudioPolicyManagerBase::getStrategy(stream); |
| bool shouldWait = (strategy == STRATEGY_SONIFICATION) || |
| (strategy == STRATEGY_SONIFICATION_RESPECTFUL); |
| uint32_t waitMs = 0; |
| bool force = false; |
| uint32_t muteWaitMs; |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| AudioOutputDescriptor *desc = mOutputs.valueAt(i); |
| if (desc != outputDesc) { |
| // force a device change if any other output is managed by the same hw |
| // module and has a current device selection that differs from selected device. |
| // In this case, the audio HAL must receive the new device selection so that it can |
| // change the device currently selected by the other active output. |
| if (outputDesc->sharesHwModuleWith(desc) && |
| desc->device() != newDevice) { |
| force = true; |
| } |
| // wait for audio on other active outputs to be presented when starting |
| // a notification so that audio focus effect can propagate. |
| if (shouldWait && (desc->refCount() != 0) && (waitMs < desc->latency())) { |
| waitMs = desc->latency(); |
| } |
| } |
| } |
| #ifdef QCOM_FM_ENABLED |
| if(stream == AudioSystem::FM && output == getA2dpOutput()) { |
| setOutputDevice(output, AudioPolicyManagerBase::getNewDevice((output), true)); |
| } else |
| #endif |
| { |
| setOutputDevice(output, AudioPolicyManagerBase::getNewDevice((output), true)); |
| } |
| |
| // handle special case for sonification while in call |
| if (isInCall()) { |
| AudioPolicyManagerBase::handleIncallSonification(stream, true, false); |
| } |
| |
| // apply volume rules for current stream and device if necessary |
| checkAndSetVolume(stream, |
| mStreams[stream].getVolumeIndex(newDevice), |
| output, |
| newDevice); |
| |
| // update the outputs if starting an output with a stream that can affect notification |
| // routing |
| handleNotificationRoutingForStream(stream); |
| if (waitMs > muteWaitMs) { |
| usleep((waitMs - muteWaitMs) * 2 * 1000); |
| } |
| } |
| return NO_ERROR; |
| } |
| status_t AudioPolicyManager::stopOutput(audio_io_handle_t output, AudioSystem::stream_type stream, int session) |
| { |
| ALOGV("stopOutput() output %d, stream %d, session %d", output, stream, session); |
| ssize_t index = mOutputs.indexOfKey(output); |
| if (index < 0) { |
| ALOGW("stopOutput() unknow output %d", output); |
| return BAD_VALUE; |
| } |
| |
| AudioOutputDescriptor *outputDesc = mOutputs.valueAt(index); |
| |
| // handle special case for sonification while in call |
| if (isInCall()) { |
| handleIncallSonification(stream, false, false); |
| } |
| |
| if (outputDesc->mRefCount[stream] > 0) { |
| // decrement usage count of this stream on the output |
| outputDesc->changeRefCount(stream, -1); |
| // store time at which the stream was stopped - see isStreamActive() |
| if (outputDesc->mRefCount[stream] == 0) { |
| if (stream == AudioSystem::MUSIC) { |
| outputDesc->mStopTime[stream] = systemTime(); |
| } |
| audio_devices_t newDevice = getNewDevice(output, false /*fromCache*/); |
| // delay the device switch by twice the latency because stopOutput() is executed when |
| // the track stop() command is received and at that time the audio track buffer can |
| // still contain data that needs to be drained. The latency only covers the audio HAL |
| // and kernel buffers. Also the latency does not always include additional delay in the |
| // audio path (audio DSP, CODEC ...) |
| setOutputDevice(output, newDevice, false, outputDesc->mLatency*2); |
| |
| // force restoring the device selection on other active outputs if it differs from the |
| // one being selected for this output |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| audio_io_handle_t curOutput = mOutputs.keyAt(i); |
| AudioOutputDescriptor *desc = mOutputs.valueAt(i); |
| if (curOutput != output && |
| desc->refCount() != 0 && |
| outputDesc->sharesHwModuleWith(desc) && |
| newDevice != desc->device()) { |
| setOutputDevice(curOutput, |
| getNewDevice(curOutput, false /*fromCache*/), |
| true, |
| outputDesc->mLatency*2); |
| } |
| } |
| // update the outputs if stopping one with a stream that can affect notification routing |
| handleNotificationRoutingForStream(stream); |
| } |
| return NO_ERROR; |
| } else { |
| ALOGW("stopOutput() refcount is already 0 for output %d", output); |
| return INVALID_OPERATION; |
| } |
| } |
| |
| // ---------------------------------------------------------------------------- |
| // AudioPolicyManager |
| // ---------------------------------------------------------------------------- |
| |
| // --- class factory |
| |
| |
| extern "C" AudioPolicyInterface* createAudioPolicyManager(AudioPolicyClientInterface *clientInterface) |
| { |
| return new AudioPolicyManager(clientInterface); |
| } |
| |
| extern "C" void destroyAudioPolicyManager(AudioPolicyInterface *interface) |
| { |
| delete interface; |
| } |
| |
| // --- |
| |
| uint32_t AudioPolicyManager::setOutputDevice(audio_io_handle_t output, audio_devices_t device, bool force, int delayMs) |
| { |
| ALOGV("setOutputDevice() output %d device %04x delayMs %d", output, device, delayMs); |
| AudioOutputDescriptor *outputDesc = mOutputs.valueFor(output); |
| AudioParameter param; |
| uint32_t muteWaitMs = 0; |
| |
| if (outputDesc->isDuplicated()) { |
| muteWaitMs = setOutputDevice(outputDesc->mOutput1->mId, device, force, delayMs); |
| muteWaitMs += setOutputDevice(outputDesc->mOutput2->mId, device, force, delayMs); |
| return muteWaitMs; |
| } |
| // filter devices according to output selected |
| device = (audio_devices_t)(device & outputDesc->mProfile->mSupportedDevices); |
| |
| audio_devices_t prevDevice = outputDesc->mDevice; |
| |
| ALOGV("setOutputDevice() prevDevice %04x", prevDevice); |
| |
| if (device != 0) { |
| outputDesc->mDevice = device; |
| } |
| muteWaitMs = checkDeviceMuteStrategies(outputDesc, prevDevice, delayMs); |
| |
| // Do not change the routing if: |
| // - the requested device is 0 |
| // - the requested device is the same as current device and force is not specified. |
| // Doing this check here allows the caller to call setOutputDevice() without conditions |
| if ((device == 0 || device == prevDevice) && !force) { |
| ALOGV("setOutputDevice() setting same device %04x or null device for output %d", device, output); |
| return muteWaitMs; |
| } |
| |
| ALOGV("setOutputDevice() changing device"); |
| // do the routing |
| param.addInt(String8(AudioParameter::keyRouting), (int)device); |
| mpClientInterface->setParameters(output, param.toString(), delayMs); |
| |
| // update stream volumes according to new device |
| applyStreamVolumes(output, device, delayMs); |
| |
| return muteWaitMs; |
| } |
| status_t AudioPolicyManager::checkAndSetVolume(int stream, int index, audio_io_handle_t output, audio_devices_t device, int delayMs, bool force) |
| { |
| // do not change actual stream volume if the stream is muted |
| if (mOutputs.valueFor(output)->mMuteCount[stream] != 0) { |
| ALOGVV("checkAndSetVolume() stream %d muted count %d", |
| stream, mOutputs.valueFor(output)->mMuteCount[stream]); |
| return NO_ERROR; |
| } |
| |
| // do not change in call volume if bluetooth is connected and vice versa |
| if ((stream == AudioSystem::VOICE_CALL && mForceUse[AudioSystem::FOR_COMMUNICATION] == AudioSystem::FORCE_BT_SCO) || |
| (stream == AudioSystem::BLUETOOTH_SCO && mForceUse[AudioSystem::FOR_COMMUNICATION] != AudioSystem::FORCE_BT_SCO)) { |
| ALOGV("checkAndSetVolume() cannot set stream %d volume with force use = %d for comm", |
| stream, mForceUse[AudioSystem::FOR_COMMUNICATION]); |
| return INVALID_OPERATION; |
| } |
| |
| float volume = computeVolume(stream, index, output, device); |
| // We actually change the volume if: |
| // - the float value returned by computeVolume() changed |
| // - the force flag is set |
| if (volume != mOutputs.valueFor(output)->mCurVolume[stream] || |
| #ifdef QCOM_FM_ENABLED |
| (stream == AudioSystem::FM) || |
| #endif |
| force) { |
| mOutputs.valueFor(output)->mCurVolume[stream] = volume; |
| ALOGVV("checkAndSetVolume() for output %d stream %d, volume %f, delay %d", output, stream, volume, delayMs); |
| if (stream == AudioSystem::VOICE_CALL || |
| stream == AudioSystem::DTMF || |
| stream == AudioSystem::BLUETOOTH_SCO) { |
| float voiceVolume = -1.0; |
| // offset value to reflect actual hardware volume that never reaches 0 |
| // 1% corresponds roughly to first step in VOICE_CALL stream volume setting (see AudioService.java) |
| volume = 0.01 + 0.99 * volume; |
| if (stream == AudioSystem::VOICE_CALL) { |
| voiceVolume = (float)index/(float)mStreams[stream].mIndexMax; |
| } else if (stream == AudioSystem::BLUETOOTH_SCO) { |
| voiceVolume = 1.0; |
| } |
| if (voiceVolume >= 0 && output == mPrimaryOutput) { |
| mpClientInterface->setVoiceVolume(voiceVolume, delayMs); |
| } |
| #ifdef QCOM_FM_ENABLED |
| } else if (stream == AudioSystem::FM) { |
| float fmVolume = -1.0; |
| fmVolume = computeVolume(stream, index, output, device); |
| if (fmVolume >= 0) { |
| if(output == mPrimaryOutput) |
| mpClientInterface->setFmVolume(fmVolume, delayMs); |
| else if(mHasA2dp && output == getA2dpOutput()) |
| mpClientInterface->setStreamVolume((AudioSystem::stream_type)stream, volume, output, delayMs); |
| } |
| return NO_ERROR; |
| #endif |
| } |
| mpClientInterface->setStreamVolume((AudioSystem::stream_type)stream, volume, output, delayMs); |
| } |
| return NO_ERROR; |
| } |
| |
| audio_io_handle_t AudioPolicyManager::getInput(int inputSource, |
| uint32_t samplingRate, |
| uint32_t format, |
| uint32_t channelMask, |
| AudioSystem::audio_in_acoustics acoustics) |
| { |
| audio_io_handle_t input = 0; |
| audio_devices_t device = getDeviceForInputSource(inputSource); |
| |
| ALOGV("getInput() inputSource %d, samplingRate %d, format %d, channelMask %x, acoustics %x", |
| inputSource, samplingRate, format, channelMask, acoustics); |
| |
| if (device == AUDIO_DEVICE_NONE) { |
| ALOGW("getInput() could not find device for inputSource %d", inputSource); |
| return 0; |
| } |
| |
| // adapt channel selection to input source |
| switch(inputSource) { |
| case AUDIO_SOURCE_VOICE_UPLINK: |
| channelMask = AudioSystem::CHANNEL_IN_VOICE_UPLINK; |
| break; |
| case AUDIO_SOURCE_VOICE_DOWNLINK: |
| channelMask = AudioSystem::CHANNEL_IN_VOICE_DNLINK; |
| break; |
| case AUDIO_SOURCE_VOICE_CALL: |
| channelMask = (AudioSystem::CHANNEL_IN_VOICE_UPLINK | AudioSystem::CHANNEL_IN_VOICE_DNLINK); |
| break; |
| default: |
| break; |
| } |
| |
| IOProfile *profile = getInputProfile(device, |
| samplingRate, |
| format, |
| channelMask); |
| if (profile == NULL) { |
| ALOGW("getInput() could not find profile for device %04x, samplingRate %d, format %d," |
| "channelMask %04x", |
| device, samplingRate, format, channelMask); |
| return 0; |
| } |
| |
| if (profile->mModule->mHandle == 0) { |
| ALOGE("getInput(): HW module %s not opened", profile->mModule->mName); |
| return 0; |
| } |
| |
| AudioInputDescriptor *inputDesc = new AudioInputDescriptor(profile); |
| |
| inputDesc->mInputSource = inputSource; |
| inputDesc->mDevice = device; |
| inputDesc->mSamplingRate = samplingRate; |
| inputDesc->mFormat = (audio_format_t)format; |
| inputDesc->mChannelMask = (audio_channel_mask_t)channelMask; |
| inputDesc->mRefCount = 0; |
| input = mpClientInterface->openInput(profile->mModule->mHandle, |
| &inputDesc->mDevice, |
| &inputDesc->mSamplingRate, |
| &inputDesc->mFormat, |
| &inputDesc->mChannelMask); |
| |
| // only accept input with the exact requested set of parameters |
| if (input == 0 || |
| (samplingRate != inputDesc->mSamplingRate) || |
| (format != inputDesc->mFormat) || |
| (channelMask != inputDesc->mChannelMask)) { |
| ALOGV("getInput() failed opening input: samplingRate %d, format %d, channelMask %d", |
| samplingRate, format, channelMask); |
| if (input != 0) { |
| mpClientInterface->closeInput(input); |
| } |
| delete inputDesc; |
| return 0; |
| } |
| mInputs.add(input, inputDesc); |
| return input; |
| } |
| |
| audio_devices_t AudioPolicyManager::getDeviceForInputSource(int inputSource) |
| { |
| uint32_t device = AUDIO_DEVICE_NONE; |
| |
| switch(inputSource) { |
| case AUDIO_SOURCE_DEFAULT: |
| case AUDIO_SOURCE_MIC: |
| case AUDIO_SOURCE_VOICE_RECOGNITION: |
| if (mForceUse[AudioSystem::FOR_RECORD] == AudioSystem::FORCE_BT_SCO && |
| mAvailableInputDevices & AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET) { |
| device = AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET; |
| } else if (mAvailableInputDevices & AUDIO_DEVICE_IN_WIRED_HEADSET) { |
| device = AUDIO_DEVICE_IN_WIRED_HEADSET; |
| } else if (mAvailableInputDevices & AUDIO_DEVICE_IN_BUILTIN_MIC) { |
| device = AUDIO_DEVICE_IN_BUILTIN_MIC; |
| } |
| break; |
| case AUDIO_SOURCE_VOICE_COMMUNICATION: |
| device = AudioSystem::DEVICE_IN_COMMUNICATION; |
| break; |
| |
| case AUDIO_SOURCE_CAMCORDER: |
| if (mAvailableInputDevices & AUDIO_DEVICE_IN_BACK_MIC) { |
| device = AUDIO_DEVICE_IN_BACK_MIC; |
| } else if (mAvailableInputDevices & AUDIO_DEVICE_IN_BUILTIN_MIC) { |
| device = AUDIO_DEVICE_IN_BUILTIN_MIC; |
| } |
| break; |
| case AUDIO_SOURCE_VOICE_UPLINK: |
| case AUDIO_SOURCE_VOICE_DOWNLINK: |
| case AUDIO_SOURCE_VOICE_CALL: |
| if (mAvailableInputDevices & AUDIO_DEVICE_IN_VOICE_CALL) { |
| device = AUDIO_DEVICE_IN_VOICE_CALL; |
| } |
| break; |
| case AUDIO_SOURCE_REMOTE_SUBMIX: |
| if (mAvailableInputDevices & AUDIO_DEVICE_IN_REMOTE_SUBMIX) { |
| device = AUDIO_DEVICE_IN_REMOTE_SUBMIX; |
| } |
| break; |
| |
| #ifdef QCOM_FM_ENABLED |
| case AUDIO_SOURCE_FM_RX: |
| device = AudioSystem::DEVICE_IN_FM_RX; |
| break; |
| case AUDIO_SOURCE_FM_RX_A2DP: |
| device = AudioSystem::DEVICE_IN_FM_RX_A2DP; |
| break; |
| #endif |
| default: |
| ALOGW("getDeviceForInputSource() invalid input source %d", inputSource); |
| break; |
| } |
| ALOGV("getDeviceForInputSource()input source %d, device %08x", inputSource, device); |
| return device; |
| } |
| /* |
| Overwriting this function from base class to allow 2 acitve AudioRecord clients in case of FM. |
| One for FM A2DP playbck and other for FM recording. |
| */ |
| status_t AudioPolicyManager::startInput(audio_io_handle_t input) |
| { |
| ALOGV("startInput() input %d", input); |
| ssize_t index = mInputs.indexOfKey(input); |
| if (index < 0) { |
| ALOGW("startInput() unknow input %d", input); |
| return BAD_VALUE; |
| } |
| AudioInputDescriptor *inputDesc = mInputs.valueAt(index); |
| |
| #ifdef AUDIO_POLICY_TEST |
| if (mTestInput == 0) |
| #endif //AUDIO_POLICY_TEST |
| { |
| // refuse 2 active AudioRecord clients at the same time |
| if (getActiveInput() != 0) { |
| ALOGW("startInput() input %d failed: other input already started", input); |
| return INVALID_OPERATION; |
| } |
| } |
| |
| AudioParameter param = AudioParameter(); |
| param.addInt(String8(AudioParameter::keyRouting), (int)inputDesc->mDevice); |
| // use Voice Recognition mode or not for this input based on input source |
| int vr_enabled = inputDesc->mInputSource == AUDIO_SOURCE_VOICE_RECOGNITION ? 1 : 0; |
| param.addInt(String8("vr_mode"), vr_enabled); |
| ALOGV("AudioPolicyManager::startInput(%d), setting vr_mode to %d", inputDesc->mInputSource, vr_enabled); |
| mpClientInterface->setParameters(input, param.toString()); |
| inputDesc->mRefCount = 1; |
| return NO_ERROR; |
| } |
| |
| void AudioPolicyManager::handleNotificationRoutingForStream(AudioSystem::stream_type stream) { |
| switch(stream) { |
| case AudioSystem::MUSIC: |
| checkOutputForStrategy(STRATEGY_SONIFICATION_RESPECTFUL); |
| updateDevicesAndOutputs(); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| |
| }; // namespace android_audio_legacy |