| function hmm() { |
| cat <<EOF |
| Invoke ". build/envsetup.sh" from your shell to add the following functions to your environment: |
| - lunch: lunch <product_name>-<build_variant> |
| - tapas: tapas [<App1> <App2> ...] [arm|x86|mips|armv5|arm64|x86_64|mips64] [eng|userdebug|user] |
| - croot: Changes directory to the top of the tree. |
| - cout: Changes directory to out. |
| - m: Makes from the top of the tree. |
| - mm: Builds all of the modules in the current directory, but not their dependencies. |
| - mmm: Builds all of the modules in the supplied directories, but not their dependencies. |
| To limit the modules being built use the syntax: mmm dir/:target1,target2. |
| - mma: Builds all of the modules in the current directory, and their dependencies. |
| - mmp: Builds all of the modules in the current directory and pushes them to the device. |
| - mmmp: Builds all of the modules in the supplied directories and pushes them to the device. |
| - mmma: Builds all of the modules in the supplied directories, and their dependencies. |
| - cgrep: Greps on all local C/C++ files. |
| - ggrep: Greps on all local Gradle files. |
| - jgrep: Greps on all local Java files. |
| - resgrep: Greps on all local res/*.xml files. |
| - sgrep: Greps on all local source files. |
| - godir: Go to the directory containing a file. |
| - cmremote: Add git remote for CM Gerrit Review |
| - cmgerrit: A Git wrapper that fetches/pushes patch from/to CM Gerrit Review |
| - cmrebase: Rebase a Gerrit change and push it again |
| - aospremote: Add git remote for matching AOSP repository |
| - cafremote: Add git remote for matching CodeAurora repository. |
| - mka: Builds using SCHED_BATCH on all processors |
| - mkap: Builds the module(s) using mka and pushes them to the device. |
| - cmka: Cleans and builds using mka. |
| - reposync: Parallel repo sync using ionice and SCHED_BATCH |
| - repopick: Utility to fetch changes from Gerrit. |
| - installboot: Installs a boot.img to the connected device. |
| - installrecovery: Installs a recovery.img to the connected device. |
| |
| Look at the source to view more functions. The complete list is: |
| EOF |
| T=$(gettop) |
| local A |
| A="" |
| for i in `cat $T/build/envsetup.sh | sed -n "/^[ \t]*function /s/function \([a-z_]*\).*/\1/p" | sort | uniq`; do |
| A="$A $i" |
| done |
| echo $A |
| } |
| |
| # Get the value of a build variable as an absolute path. |
| function get_abs_build_var() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| (\cd $T; CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \ |
| command make --no-print-directory -f build/core/config.mk dumpvar-abs-$1) |
| } |
| |
| # Get the exact value of a build variable. |
| function get_build_var() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| (\cd $T; CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \ |
| command make --no-print-directory -f build/core/config.mk dumpvar-$1) |
| } |
| |
| # check to see if the supplied product is one we can build |
| function check_product() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| |
| if (echo -n $1 | grep -q -e "^ch_") ; then |
| CH_BUILD=$(echo -n $1 | sed -e 's/^ch_//g') |
| export BUILD_NUMBER=$((date +%s%N ; echo $CH_BUILD; hostname) | openssl sha1 | sed -e 's/.*=//g; s/ //g' | cut -c1-10) |
| else |
| CH_BUILD= |
| fi |
| export CH_BUILD |
| |
| TARGET_PRODUCT=$1 \ |
| TARGET_BUILD_VARIANT= \ |
| TARGET_BUILD_TYPE= \ |
| TARGET_BUILD_APPS= \ |
| get_build_var TARGET_DEVICE > /dev/null |
| # hide successful answers, but allow the errors to show |
| } |
| |
| VARIANT_CHOICES=(user userdebug eng) |
| |
| # check to see if the supplied variant is valid |
| function check_variant() |
| { |
| for v in ${VARIANT_CHOICES[@]} |
| do |
| if [ "$v" = "$1" ] |
| then |
| return 0 |
| fi |
| done |
| return 1 |
| } |
| |
| function setpaths() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return |
| fi |
| |
| ################################################################## |
| # # |
| # Read me before you modify this code # |
| # # |
| # This function sets ANDROID_BUILD_PATHS to what it is adding # |
| # to PATH, and the next time it is run, it removes that from # |
| # PATH. This is required so lunch can be run more than once # |
| # and still have working paths. # |
| # # |
| ################################################################## |
| |
| # Note: on windows/cygwin, ANDROID_BUILD_PATHS will contain spaces |
| # due to "C:\Program Files" being in the path. |
| |
| # out with the old |
| if [ -n "$ANDROID_BUILD_PATHS" ] ; then |
| export PATH=${PATH/$ANDROID_BUILD_PATHS/} |
| fi |
| if [ -n "$ANDROID_PRE_BUILD_PATHS" ] ; then |
| export PATH=${PATH/$ANDROID_PRE_BUILD_PATHS/} |
| # strip leading ':', if any |
| export PATH=${PATH/:%/} |
| fi |
| |
| # and in with the new |
| prebuiltdir=$(getprebuilt) |
| gccprebuiltdir=$(get_abs_build_var ANDROID_GCC_PREBUILTS) |
| |
| # defined in core/config.mk |
| targetgccversion=$(get_build_var TARGET_GCC_VERSION) |
| targetgccversion2=$(get_build_var 2ND_TARGET_GCC_VERSION) |
| export TARGET_GCC_VERSION=$targetgccversion |
| |
| # The gcc toolchain does not exists for windows/cygwin. In this case, do not reference it. |
| export ANDROID_TOOLCHAIN= |
| export ANDROID_TOOLCHAIN_2ND_ARCH= |
| local ARCH=$(get_build_var TARGET_ARCH) |
| case $ARCH in |
| x86) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin |
| ;; |
| x86_64) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin |
| ;; |
| arm) toolchaindir=arm/arm-linux-androideabi-$targetgccversion/bin |
| ;; |
| arm64) toolchaindir=aarch64/aarch64-linux-android-$targetgccversion/bin; |
| toolchaindir2=arm/arm-linux-androideabi-$targetgccversion2/bin |
| ;; |
| mips|mips64) toolchaindir=mips/mips64el-linux-android-$targetgccversion/bin |
| ;; |
| *) |
| echo "Can't find toolchain for unknown architecture: $ARCH" |
| toolchaindir=xxxxxxxxx |
| ;; |
| esac |
| if [ -d "$gccprebuiltdir/$toolchaindir" ]; then |
| export ANDROID_TOOLCHAIN=$gccprebuiltdir/$toolchaindir |
| fi |
| |
| if [ -d "$gccprebuiltdir/$toolchaindir2" ]; then |
| export ANDROID_TOOLCHAIN_2ND_ARCH=$gccprebuiltdir/$toolchaindir2 |
| fi |
| |
| unset ANDROID_KERNEL_TOOLCHAIN_PATH |
| case $ARCH in |
| arm) |
| # Legacy toolchain configuration used for ARM kernel compilation |
| toolchaindir=arm/arm-eabi-$targetgccversion/bin |
| if [ -d "$gccprebuiltdir/$toolchaindir" ]; then |
| export ARM_EABI_TOOLCHAIN="$gccprebuiltdir/$toolchaindir" |
| ANDROID_KERNEL_TOOLCHAIN_PATH="$ARM_EABI_TOOLCHAIN": |
| fi |
| ;; |
| *) |
| # No need to set ARM_EABI_TOOLCHAIN for other ARCHs |
| ;; |
| esac |
| |
| export ANDROID_DEV_SCRIPTS=$T/development/scripts:$T/prebuilts/devtools/tools |
| export ANDROID_BUILD_PATHS=$(get_build_var ANDROID_BUILD_PATHS):$ANDROID_TOOLCHAIN:$ANDROID_TOOLCHAIN_2ND_ARCH:$ANDROID_KERNEL_TOOLCHAIN_PATH$ANDROID_DEV_SCRIPTS: |
| |
| # If prebuilts/android-emulator/<system>/ exists, prepend it to our PATH |
| # to ensure that the corresponding 'emulator' binaries are used. |
| case $(uname -s) in |
| Darwin) |
| ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/darwin-x86_64 |
| ;; |
| Linux) |
| ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/linux-x86_64 |
| ;; |
| *) |
| ANDROID_EMULATOR_PREBUILTS= |
| ;; |
| esac |
| if [ -n "$ANDROID_EMULATOR_PREBUILTS" -a -d "$ANDROID_EMULATOR_PREBUILTS" ]; then |
| ANDROID_BUILD_PATHS=$ANDROID_BUILD_PATHS$ANDROID_EMULATOR_PREBUILTS: |
| export ANDROID_EMULATOR_PREBUILTS |
| fi |
| |
| export PATH=$ANDROID_BUILD_PATHS$PATH |
| |
| unset ANDROID_JAVA_TOOLCHAIN |
| unset ANDROID_PRE_BUILD_PATHS |
| if [ -n "$JAVA_HOME" ]; then |
| export ANDROID_JAVA_TOOLCHAIN=$JAVA_HOME/bin |
| export ANDROID_PRE_BUILD_PATHS=$ANDROID_JAVA_TOOLCHAIN: |
| export PATH=$ANDROID_PRE_BUILD_PATHS$PATH |
| fi |
| |
| unset ANDROID_PRODUCT_OUT |
| export ANDROID_PRODUCT_OUT=$(get_abs_build_var PRODUCT_OUT) |
| export OUT=$ANDROID_PRODUCT_OUT |
| |
| unset ANDROID_HOST_OUT |
| export ANDROID_HOST_OUT=$(get_abs_build_var HOST_OUT) |
| |
| # needed for building linux on MacOS |
| # TODO: fix the path |
| #export HOST_EXTRACFLAGS="-I "$T/system/kernel_headers/host_include |
| } |
| |
| function printconfig() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| get_build_var report_config |
| } |
| |
| function set_stuff_for_environment() |
| { |
| settitle |
| set_java_home |
| setpaths |
| set_sequence_number |
| |
| # With this environment variable new GCC can apply colors to warnings/errors |
| export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01' |
| } |
| |
| function set_sequence_number() |
| { |
| export BUILD_ENV_SEQUENCE_NUMBER=10 |
| } |
| |
| function settitle() |
| { |
| if [ "$STAY_OFF_MY_LAWN" = "" ]; then |
| local arch=$(gettargetarch) |
| local product=$TARGET_PRODUCT |
| local variant=$TARGET_BUILD_VARIANT |
| local apps=$TARGET_BUILD_APPS |
| if [ -z "$PROMPT_COMMAND" ]; then |
| # No prompts |
| PROMPT_COMMAND="echo -ne \"\033]0;${USER}@${HOSTNAME}: ${PWD}\007\"" |
| elif [ -z "$(echo $PROMPT_COMMAND | grep '033]0;')" ]; then |
| # Prompts exist, but no hardstatus |
| PROMPT_COMMAND="echo -ne \"\033]0;${USER}@${HOSTNAME}: ${PWD}\007\";${PROMPT_COMMAND}" |
| fi |
| if [ ! -z "$ANDROID_PROMPT_PREFIX" ]; then |
| PROMPT_COMMAND="$(echo $PROMPT_COMMAND | sed -e 's/$ANDROID_PROMPT_PREFIX //g')" |
| fi |
| |
| if [ -z "$apps" ]; then |
| ANDROID_PROMPT_PREFIX="[${arch}-${product}-${variant}]" |
| else |
| ANDROID_PROMPT_PREFIX="[$arch $apps $variant]" |
| fi |
| export ANDROID_PROMPT_PREFIX |
| |
| # Inject build data into hardstatus |
| export PROMPT_COMMAND="$(echo $PROMPT_COMMAND | sed -e 's/\\033]0;\(.*\)\\007/\\033]0;$ANDROID_PROMPT_PREFIX \1\\007/g')" |
| fi |
| } |
| |
| function check_bash_version() |
| { |
| # Keep us from trying to run in something that isn't bash. |
| if [ -z "${BASH_VERSION}" ]; then |
| return 1 |
| fi |
| |
| # Keep us from trying to run in bash that's too old. |
| if [ "${BASH_VERSINFO[0]}" -lt 4 ] ; then |
| return 2 |
| fi |
| |
| return 0 |
| } |
| |
| function choosetype() |
| { |
| echo "Build type choices are:" |
| echo " 1. release" |
| echo " 2. debug" |
| echo |
| |
| local DEFAULT_NUM DEFAULT_VALUE |
| DEFAULT_NUM=1 |
| DEFAULT_VALUE=release |
| |
| export TARGET_BUILD_TYPE= |
| local ANSWER |
| while [ -z $TARGET_BUILD_TYPE ] |
| do |
| echo -n "Which would you like? ["$DEFAULT_NUM"] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| case $ANSWER in |
| "") |
| export TARGET_BUILD_TYPE=$DEFAULT_VALUE |
| ;; |
| 1) |
| export TARGET_BUILD_TYPE=release |
| ;; |
| release) |
| export TARGET_BUILD_TYPE=release |
| ;; |
| 2) |
| export TARGET_BUILD_TYPE=debug |
| ;; |
| debug) |
| export TARGET_BUILD_TYPE=debug |
| ;; |
| *) |
| echo |
| echo "I didn't understand your response. Please try again." |
| echo |
| ;; |
| esac |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| |
| set_stuff_for_environment |
| } |
| |
| # |
| # This function isn't really right: It chooses a TARGET_PRODUCT |
| # based on the list of boards. Usually, that gets you something |
| # that kinda works with a generic product, but really, you should |
| # pick a product by name. |
| # |
| function chooseproduct() |
| { |
| if [ "x$TARGET_PRODUCT" != x ] ; then |
| default_value=$TARGET_PRODUCT |
| else |
| default_value=full |
| fi |
| |
| export TARGET_PRODUCT= |
| local ANSWER |
| while [ -z "$TARGET_PRODUCT" ] |
| do |
| echo -n "Which product would you like? [$default_value] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| |
| if [ -z "$ANSWER" ] ; then |
| export TARGET_PRODUCT=$default_value |
| else |
| if check_product $ANSWER |
| then |
| export TARGET_PRODUCT=$ANSWER |
| else |
| echo "** Not a valid product: $ANSWER" |
| fi |
| fi |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| |
| set_stuff_for_environment |
| } |
| |
| function choosevariant() |
| { |
| echo "Variant choices are:" |
| local index=1 |
| local v |
| for v in ${VARIANT_CHOICES[@]} |
| do |
| # The product name is the name of the directory containing |
| # the makefile we found, above. |
| echo " $index. $v" |
| index=$(($index+1)) |
| done |
| |
| local default_value=eng |
| local ANSWER |
| |
| export TARGET_BUILD_VARIANT= |
| while [ -z "$TARGET_BUILD_VARIANT" ] |
| do |
| echo -n "Which would you like? [$default_value] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| |
| if [ -z "$ANSWER" ] ; then |
| export TARGET_BUILD_VARIANT=$default_value |
| elif (echo -n $ANSWER | grep -q -e "^[0-9][0-9]*$") ; then |
| if [ "$ANSWER" -le "${#VARIANT_CHOICES[@]}" ] ; then |
| export TARGET_BUILD_VARIANT=${VARIANT_CHOICES[$(($ANSWER-1))]} |
| fi |
| else |
| if check_variant $ANSWER |
| then |
| export TARGET_BUILD_VARIANT=$ANSWER |
| else |
| echo "** Not a valid variant: $ANSWER" |
| fi |
| fi |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| } |
| |
| function choosecombo() |
| { |
| choosetype $1 |
| |
| echo |
| echo |
| chooseproduct $2 |
| |
| echo |
| echo |
| choosevariant $3 |
| |
| echo |
| set_stuff_for_environment |
| printconfig |
| } |
| |
| # Clear this variable. It will be built up again when the vendorsetup.sh |
| # files are included at the end of this file. |
| unset LUNCH_MENU_CHOICES |
| function add_lunch_combo() |
| { |
| local new_combo=$1 |
| local c |
| for c in ${LUNCH_MENU_CHOICES[@]} ; do |
| if [ "$new_combo" = "$c" ] ; then |
| return |
| fi |
| done |
| LUNCH_MENU_CHOICES=(${LUNCH_MENU_CHOICES[@]} $new_combo) |
| } |
| |
| # add the default one here |
| add_lunch_combo aosp_arm-eng |
| add_lunch_combo aosp_arm64-eng |
| add_lunch_combo aosp_mips-eng |
| add_lunch_combo aosp_mips64-eng |
| add_lunch_combo aosp_x86-eng |
| add_lunch_combo aosp_x86_64-eng |
| |
| function print_lunch_menu() |
| { |
| local uname=$(uname) |
| echo |
| echo "You're building on" $uname |
| if [ "$(uname)" = "Darwin" ] ; then |
| echo " (ohai, koush!)" |
| fi |
| echo |
| if [ "z${CH_DEVICES_ONLY}" != "z" ]; then |
| echo "Breakfast menu... pick a combo:" |
| else |
| echo "Lunch menu... pick a combo:" |
| fi |
| |
| local i=1 |
| local choice |
| for choice in ${LUNCH_MENU_CHOICES[@]} |
| do |
| echo " $i. $choice " |
| i=$(($i+1)) |
| done | column |
| |
| if [ "z${CH_DEVICES_ONLY}" != "z" ]; then |
| echo "... and don't forget the bacon!" |
| fi |
| |
| echo |
| } |
| |
| function brunch() |
| { |
| breakfast $* |
| if [ $? -eq 0 ]; then |
| mka bacon |
| else |
| echo "No such item in brunch menu. Try 'breakfast'" |
| return 1 |
| fi |
| return $? |
| } |
| |
| function breakfast() |
| { |
| target=$1 |
| local variant=$2 |
| CH_DEVICES_ONLY="true" |
| unset LUNCH_MENU_CHOICES |
| add_lunch_combo full-eng |
| for f in `/bin/ls vendor/ch/vendorsetup.sh 2> /dev/null` |
| do |
| echo "including $f" |
| . $f |
| done |
| unset f |
| |
| if [ $# -eq 0 ]; then |
| # No arguments, so let's have the full menu |
| lunch |
| else |
| echo "z$target" | grep -q "-" |
| if [ $? -eq 0 ]; then |
| # A buildtype was specified, assume a full device name |
| lunch $target |
| else |
| # This is probably just the CH model name |
| if [ -z "$variant" ]; then |
| variant="userdebug" |
| fi |
| lunch ch_$target-$variant |
| fi |
| fi |
| return $? |
| } |
| |
| alias bib=breakfast |
| |
| function lunch() |
| { |
| local answer |
| |
| if [ "$1" ] ; then |
| answer=$1 |
| else |
| print_lunch_menu |
| echo -n "Which would you like? [aosp_arm-eng] " |
| read answer |
| fi |
| |
| local selection= |
| |
| if [ -z "$answer" ] |
| then |
| selection=aosp_arm-eng |
| elif (echo -n $answer | grep -q -e "^[0-9][0-9]*$") |
| then |
| if [ $answer -le ${#LUNCH_MENU_CHOICES[@]} ] |
| then |
| selection=${LUNCH_MENU_CHOICES[$(($answer-1))]} |
| fi |
| elif (echo -n $answer | grep -q -e "^[^\-][^\-]*-[^\-][^\-]*$") |
| then |
| selection=$answer |
| fi |
| |
| if [ -z "$selection" ] |
| then |
| echo |
| echo "Invalid lunch combo: $answer" |
| return 1 |
| fi |
| |
| export TARGET_BUILD_APPS= |
| |
| local product=$(echo -n $selection | sed -e "s/-.*$//") |
| check_product $product |
| if [ $? -ne 0 ] |
| then |
| # if we can't find a product, try to grab it off the CM github |
| T=$(gettop) |
| pushd $T > /dev/null |
| build/tools/roomservice.py $product |
| popd > /dev/null |
| check_product $product |
| else |
| build/tools/roomservice.py $product true |
| fi |
| if [ $? -ne 0 ] |
| then |
| echo |
| echo "** Don't have a product spec for: '$product'" |
| echo "** Do you have the right repo manifest?" |
| product= |
| fi |
| |
| local variant=$(echo -n $selection | sed -e "s/^[^\-]*-//") |
| check_variant $variant |
| if [ $? -ne 0 ] |
| then |
| echo |
| echo "** Invalid variant: '$variant'" |
| echo "** Must be one of ${VARIANT_CHOICES[@]}" |
| variant= |
| fi |
| |
| if [ -z "$product" -o -z "$variant" ] |
| then |
| echo |
| return 1 |
| fi |
| |
| export TARGET_PRODUCT=$product |
| export TARGET_BUILD_VARIANT=$variant |
| export TARGET_BUILD_TYPE=release |
| |
| echo |
| |
| fixup_common_out_dir |
| |
| set_stuff_for_environment |
| printconfig |
| } |
| |
| # Tab completion for lunch. |
| function _lunch() |
| { |
| local cur prev opts |
| COMPREPLY=() |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| prev="${COMP_WORDS[COMP_CWORD-1]}" |
| |
| COMPREPLY=( $(compgen -W "${LUNCH_MENU_CHOICES[*]}" -- ${cur}) ) |
| return 0 |
| } |
| complete -F _lunch lunch 2>/dev/null |
| |
| # Configures the build to build unbundled apps. |
| # Run tapas with one or more app names (from LOCAL_PACKAGE_NAME) |
| function tapas() |
| { |
| local arch="$(echo $* | xargs -n 1 echo | \grep -E '^(arm|x86|mips|armv5|arm64|x86_64|mips64)$' | xargs)" |
| local variant="$(echo $* | xargs -n 1 echo | \grep -E '^(user|userdebug|eng)$' | xargs)" |
| local apps="$(echo $* | xargs -n 1 echo | \grep -E -v '^(user|userdebug|eng|arm|x86|mips|armv5|arm64|x86_64|mips64)$' | xargs)" |
| |
| if [ $(echo $arch | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple build archs supplied: $arch" |
| return |
| fi |
| if [ $(echo $variant | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple build variants supplied: $variant" |
| return |
| fi |
| |
| local product=full |
| case $arch in |
| x86) product=full_x86;; |
| mips) product=full_mips;; |
| armv5) product=generic_armv5;; |
| arm64) product=aosp_arm64;; |
| x86_64) product=aosp_x86_64;; |
| mips64) product=aosp_mips64;; |
| esac |
| if [ -z "$variant" ]; then |
| variant=eng |
| fi |
| if [ -z "$apps" ]; then |
| apps=all |
| fi |
| |
| export TARGET_PRODUCT=$product |
| export TARGET_BUILD_VARIANT=$variant |
| export TARGET_BUILD_TYPE=release |
| export TARGET_BUILD_APPS=$apps |
| |
| set_stuff_for_environment |
| printconfig |
| } |
| |
| function eat() |
| { |
| if [ "$OUT" ] ; then |
| MODVERSION=$(get_build_var CH_VERSION) |
| ZIPFILE=ch-$MODVERSION.zip |
| ZIPPATH=$OUT/$ZIPFILE |
| if [ ! -f $ZIPPATH ] ; then |
| echo "Nothing to eat" |
| return 1 |
| fi |
| adb start-server # Prevent unexpected starting server message from adb get-state in the next line |
| if [ $(adb get-state) != device -a $(adb shell busybox test -e /sbin/recovery 2> /dev/null; echo $?) != 0 ] ; then |
| echo "No device is online. Waiting for one..." |
| echo "Please connect USB and/or enable USB debugging" |
| until [ $(adb get-state) = device -o $(adb shell busybox test -e /sbin/recovery 2> /dev/null; echo $?) = 0 ];do |
| sleep 1 |
| done |
| echo "Device Found.." |
| fi |
| if (adb shell cat /system/build.prop | grep -q "ro.ch.device=$CH_BUILD"); |
| then |
| # if adbd isn't root we can't write to /cache/recovery/ |
| adb root |
| sleep 1 |
| adb wait-for-device |
| cat << EOF > /tmp/command |
| --sideload |
| EOF |
| if adb push /tmp/command /cache/recovery/ ; then |
| echo "Rebooting into recovery for sideload installation" |
| adb reboot recovery |
| adb wait-for-sideload |
| adb sideload $ZIPPATH |
| fi |
| rm /tmp/command |
| else |
| echo "Nothing to eat" |
| return 1 |
| fi |
| return $? |
| else |
| echo "The connected device does not appear to be $CH_BUILD, run away!" |
| fi |
| } |
| |
| function omnom |
| { |
| brunch $* |
| eat |
| } |
| |
| function gettop |
| { |
| local TOPFILE=build/core/envsetup.mk |
| if [ -n "$TOP" -a -f "$TOP/$TOPFILE" ] ; then |
| # The following circumlocution ensures we remove symlinks from TOP. |
| (cd $TOP; PWD= /bin/pwd) |
| else |
| if [ -f $TOPFILE ] ; then |
| # The following circumlocution (repeated below as well) ensures |
| # that we record the true directory name and not one that is |
| # faked up with symlink names. |
| PWD= /bin/pwd |
| else |
| local HERE=$PWD |
| T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do |
| \cd .. |
| T=`PWD= /bin/pwd -P` |
| done |
| \cd $HERE |
| if [ -f "$T/$TOPFILE" ]; then |
| echo $T |
| fi |
| fi |
| fi |
| } |
| |
| # Return driver for "make", if any (eg. static analyzer) |
| function getdriver() |
| { |
| local T="$1" |
| test "$WITH_STATIC_ANALYZER" = "0" && unset WITH_STATIC_ANALYZER |
| if [ -n "$WITH_STATIC_ANALYZER" ]; then |
| echo "\ |
| $T/prebuilts/misc/linux-x86/analyzer/tools/scan-build/scan-build \ |
| --use-analyzer $T/prebuilts/misc/linux-x86/analyzer/bin/analyzer \ |
| --status-bugs \ |
| --top=$T" |
| fi |
| } |
| |
| function m() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ "$T" ]; then |
| $DRV make -C $T -f build/core/main.mk $@ |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| fi |
| } |
| |
| function findmakefile() |
| { |
| TOPFILE=build/core/envsetup.mk |
| local HERE=$PWD |
| T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do |
| T=`PWD= /bin/pwd` |
| if [ -f "$T/Android.mk" ]; then |
| echo $T/Android.mk |
| \cd $HERE |
| return |
| fi |
| \cd .. |
| done |
| \cd $HERE |
| } |
| |
| function mm() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| # If we're sitting in the root of the build tree, just do a |
| # normal make. |
| if [ -f build/core/envsetup.mk -a -f Makefile ]; then |
| $DRV make $@ |
| else |
| # Find the closest Android.mk file. |
| local M=$(findmakefile) |
| local MODULES= |
| local GET_INSTALL_PATH= |
| local ARGS= |
| # Remove the path to top as the makefilepath needs to be relative |
| local M=`echo $M|sed 's:'$T'/::'` |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| elif [ ! "$M" ]; then |
| echo "Couldn't locate a makefile from the current directory." |
| else |
| for ARG in $@; do |
| case $ARG in |
| GET-INSTALL-PATH) GET_INSTALL_PATH=$ARG;; |
| esac |
| done |
| if [ -n "$GET_INSTALL_PATH" ]; then |
| MODULES= |
| ARGS=GET-INSTALL-PATH |
| else |
| MODULES=all_modules |
| ARGS=$@ |
| fi |
| ONE_SHOT_MAKEFILE=$M $DRV make -C $T -f build/core/main.mk $MODULES $ARGS |
| fi |
| fi |
| } |
| |
| function mmm() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ "$T" ]; then |
| local MAKEFILE= |
| local MODULES= |
| local ARGS= |
| local DIR TO_CHOP |
| local GET_INSTALL_PATH= |
| local DASH_ARGS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') |
| local DIRS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') |
| for DIR in $DIRS ; do |
| MODULES=`echo $DIR | sed -n -e 's/.*:\(.*$\)/\1/p' | sed 's/,/ /'` |
| if [ "$MODULES" = "" ]; then |
| MODULES=all_modules |
| fi |
| DIR=`echo $DIR | sed -e 's/:.*//' -e 's:/$::'` |
| if [ -f $DIR/Android.mk ]; then |
| local TO_CHOP=`(\cd -P -- $T && pwd -P) | wc -c | tr -d ' '` |
| local TO_CHOP=`expr $TO_CHOP + 1` |
| local START=`PWD= /bin/pwd` |
| local MFILE=`echo $START | cut -c${TO_CHOP}-` |
| if [ "$MFILE" = "" ] ; then |
| MFILE=$DIR/Android.mk |
| else |
| MFILE=$MFILE/$DIR/Android.mk |
| fi |
| MAKEFILE="$MAKEFILE $MFILE" |
| else |
| case $DIR in |
| showcommands | snod | dist | incrementaljavac) ARGS="$ARGS $DIR";; |
| GET-INSTALL-PATH) GET_INSTALL_PATH=$DIR;; |
| *) echo "No Android.mk in $DIR."; return 1;; |
| esac |
| fi |
| done |
| if [ -n "$GET_INSTALL_PATH" ]; then |
| ARGS=$GET_INSTALL_PATH |
| MODULES= |
| fi |
| ONE_SHOT_MAKEFILE="$MAKEFILE" $DRV make -C $T -f build/core/main.mk $DASH_ARGS $MODULES $ARGS |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| fi |
| } |
| |
| function mma() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ -f build/core/envsetup.mk -a -f Makefile ]; then |
| $DRV make $@ |
| else |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| fi |
| local MY_PWD=`PWD= /bin/pwd|sed 's:'$T'/::'` |
| $DRV make -C $T -f build/core/main.mk $@ all_modules BUILD_MODULES_IN_PATHS="$MY_PWD" |
| fi |
| } |
| |
| function mmma() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ "$T" ]; then |
| local DASH_ARGS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') |
| local DIRS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') |
| local MY_PWD=`PWD= /bin/pwd` |
| if [ "$MY_PWD" = "$T" ]; then |
| MY_PWD= |
| else |
| MY_PWD=`echo $MY_PWD|sed 's:'$T'/::'` |
| fi |
| local DIR= |
| local MODULE_PATHS= |
| local ARGS= |
| for DIR in $DIRS ; do |
| if [ -d $DIR ]; then |
| if [ "$MY_PWD" = "" ]; then |
| MODULE_PATHS="$MODULE_PATHS $DIR" |
| else |
| MODULE_PATHS="$MODULE_PATHS $MY_PWD/$DIR" |
| fi |
| else |
| case $DIR in |
| showcommands | snod | dist | incrementaljavac) ARGS="$ARGS $DIR";; |
| *) echo "Couldn't find directory $DIR"; return 1;; |
| esac |
| fi |
| done |
| $DRV make -C $T -f build/core/main.mk $DASH_ARGS $ARGS all_modules BUILD_MODULES_IN_PATHS="$MODULE_PATHS" |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| fi |
| } |
| |
| function croot() |
| { |
| T=$(gettop) |
| if [ "$T" ]; then |
| \cd $(gettop) |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| fi |
| } |
| |
| function cout() |
| { |
| if [ "$OUT" ]; then |
| cd $OUT |
| else |
| echo "Couldn't locate out directory. Try setting OUT." |
| fi |
| } |
| |
| function cproj() |
| { |
| TOPFILE=build/core/envsetup.mk |
| local HERE=$PWD |
| T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do |
| T=$PWD |
| if [ -f "$T/Android.mk" ]; then |
| \cd $T |
| return |
| fi |
| \cd .. |
| done |
| \cd $HERE |
| echo "can't find Android.mk" |
| } |
| |
| # simplified version of ps; output in the form |
| # <pid> <procname> |
| function qpid() { |
| local prepend='' |
| local append='' |
| if [ "$1" = "--exact" ]; then |
| prepend=' ' |
| append='$' |
| shift |
| elif [ "$1" = "--help" -o "$1" = "-h" ]; then |
| echo "usage: qpid [[--exact] <process name|pid>" |
| return 255 |
| fi |
| |
| local EXE="$1" |
| if [ "$EXE" ] ; then |
| qpid | \grep "$prepend$EXE$append" |
| else |
| adb shell ps \ |
| | tr -d '\r' \ |
| | sed -e 1d -e 's/^[^ ]* *\([0-9]*\).* \([^ ]*\)$/\1 \2/' |
| fi |
| } |
| |
| function pid() |
| { |
| local prepend='' |
| local append='' |
| if [ "$1" = "--exact" ]; then |
| prepend=' ' |
| append='$' |
| shift |
| fi |
| local EXE="$1" |
| if [ "$EXE" ] ; then |
| local PID=`adb shell ps \ |
| | tr -d '\r' \ |
| | \grep "$prepend$EXE$append" \ |
| | sed -e 's/^[^ ]* *\([0-9]*\).*$/\1/'` |
| echo "$PID" |
| else |
| echo "usage: pid [--exact] <process name>" |
| return 255 |
| fi |
| } |
| |
| # systemstack - dump the current stack trace of all threads in the system process |
| # to the usual ANR traces file |
| function systemstack() |
| { |
| stacks system_server |
| } |
| |
| function stacks() |
| { |
| if [[ $1 =~ ^[0-9]+$ ]] ; then |
| local PID="$1" |
| elif [ "$1" ] ; then |
| local PIDLIST="$(pid $1)" |
| if [[ $PIDLIST =~ ^[0-9]+$ ]] ; then |
| local PID="$PIDLIST" |
| elif [ "$PIDLIST" ] ; then |
| echo "more than one process: $1" |
| else |
| echo "no such process: $1" |
| fi |
| else |
| echo "usage: stacks [pid|process name]" |
| fi |
| |
| if [ "$PID" ] ; then |
| # Determine whether the process is native |
| if adb shell ls -l /proc/$PID/exe | grep -q /system/bin/app_process ; then |
| # Dump stacks of Dalvik process |
| local TRACES=/data/anr/traces.txt |
| local ORIG=/data/anr/traces.orig |
| local TMP=/data/anr/traces.tmp |
| |
| # Keep original traces to avoid clobbering |
| adb shell mv $TRACES $ORIG |
| |
| # Make sure we have a usable file |
| adb shell touch $TRACES |
| adb shell chmod 666 $TRACES |
| |
| # Dump stacks and wait for dump to finish |
| adb shell kill -3 $PID |
| adb shell notify $TRACES >/dev/null |
| |
| # Restore original stacks, and show current output |
| adb shell mv $TRACES $TMP |
| adb shell mv $ORIG $TRACES |
| adb shell cat $TMP |
| else |
| # Dump stacks of native process |
| local USE64BIT="$(is64bit $PID)" |
| adb shell debuggerd$USE64BIT -b $PID |
| fi |
| fi |
| } |
| |
| function gdbwrapper() |
| { |
| local GDB_CMD="$1" |
| shift 1 |
| $GDB_CMD -x "$@" |
| } |
| |
| function get_symbols_directory() |
| { |
| echo $(get_abs_build_var TARGET_OUT_UNSTRIPPED) |
| } |
| |
| # Read the ELF header from /proc/$PID/exe to determine if the process is |
| # 64-bit. |
| function is64bit() |
| { |
| local PID="$1" |
| if [ "$PID" ] ; then |
| if [[ "$(adb shell cat /proc/$PID/exe | xxd -l 1 -s 4 -ps)" -eq "02" ]] ; then |
| echo "64" |
| else |
| echo "" |
| fi |
| else |
| echo "" |
| fi |
| } |
| |
| # gdbclient now determines whether the user wants to debug a 32-bit or 64-bit |
| # executable, set up the approriate gdbserver, then invokes the proper host |
| # gdb. |
| function gdbclient() |
| { |
| local OUT_ROOT=$(get_abs_build_var PRODUCT_OUT) |
| local OUT_SYMBOLS=$(get_abs_build_var TARGET_OUT_UNSTRIPPED) |
| local OUT_SO_SYMBOLS=$(get_abs_build_var TARGET_OUT_SHARED_LIBRARIES_UNSTRIPPED) |
| local OUT_VENDOR_SO_SYMBOLS=$(get_abs_build_var TARGET_OUT_VENDOR_SHARED_LIBRARIES_UNSTRIPPED) |
| local OUT_EXE_SYMBOLS=$(get_symbols_directory) |
| local PREBUILTS=$(get_abs_build_var ANDROID_PREBUILTS) |
| local ARCH=$(get_build_var TARGET_ARCH) |
| local GDB |
| case "$ARCH" in |
| arm) GDB=arm-linux-androideabi-gdb;; |
| arm64) GDB=arm-linux-androideabi-gdb; GDB64=aarch64-linux-android-gdb;; |
| mips|mips64) GDB=mips64el-linux-android-gdb;; |
| x86) GDB=x86_64-linux-android-gdb;; |
| x86_64) GDB=x86_64-linux-android-gdb;; |
| *) echo "Unknown arch $ARCH"; return 1;; |
| esac |
| |
| if [ "$OUT_ROOT" -a "$PREBUILTS" ]; then |
| local EXE="$1" |
| if [ "$EXE" ] ; then |
| EXE=$1 |
| if [[ $EXE =~ ^[^/].* ]] ; then |
| EXE="system/bin/"$EXE |
| fi |
| else |
| EXE="app_process" |
| fi |
| |
| local PORT="$2" |
| if [ "$PORT" ] ; then |
| PORT=$2 |
| else |
| PORT=":5039" |
| fi |
| |
| local PID="$3" |
| if [ "$PID" ] ; then |
| if [[ ! "$PID" =~ ^[0-9]+$ ]] ; then |
| PID=`pid $3` |
| if [[ ! "$PID" =~ ^[0-9]+$ ]] ; then |
| # that likely didn't work because of returning multiple processes |
| # try again, filtering by root processes (don't contain colon) |
| PID=`adb shell ps | \grep $3 | \grep -v ":" | awk '{print $2}'` |
| if [[ ! "$PID" =~ ^[0-9]+$ ]] |
| then |
| echo "Couldn't resolve '$3' to single PID" |
| return 1 |
| else |
| echo "" |
| echo "WARNING: multiple processes matching '$3' observed, using root process" |
| echo "" |
| fi |
| fi |
| fi |
| adb forward "tcp$PORT" "tcp$PORT" |
| local USE64BIT="$(is64bit $PID)" |
| adb shell gdbserver$USE64BIT $PORT --attach $PID & |
| sleep 2 |
| else |
| echo "" |
| echo "If you haven't done so already, do this first on the device:" |
| echo " gdbserver $PORT /system/bin/$EXE" |
| echo " or" |
| echo " gdbserver $PORT --attach <PID>" |
| echo "" |
| fi |
| |
| OUT_SO_SYMBOLS=$OUT_SO_SYMBOLS$USE64BIT |
| OUT_VENDOR_SO_SYMBOLS=$OUT_VENDOR_SO_SYMBOLS$USE64BIT |
| |
| echo >|"$OUT_ROOT/gdbclient.cmds" "set solib-absolute-prefix $OUT_SYMBOLS" |
| echo >>"$OUT_ROOT/gdbclient.cmds" "set solib-search-path $OUT_SO_SYMBOLS:$OUT_SO_SYMBOLS/hw:$OUT_SO_SYMBOLS/ssl/engines:$OUT_SO_SYMBOLS/drm:$OUT_SO_SYMBOLS/egl:$OUT_SO_SYMBOLS/soundfx:$OUT_VENDOR_SO_SYMBOLS:$OUT_VENDOR_SO_SYMBOLS/hw:$OUT_VENDOR_SO_SYMBOLS/egl" |
| echo >>"$OUT_ROOT/gdbclient.cmds" "source $ANDROID_BUILD_TOP/development/scripts/gdb/dalvik.gdb" |
| echo >>"$OUT_ROOT/gdbclient.cmds" "target remote $PORT" |
| # Enable special debugging for ART processes. |
| if [[ $EXE =~ (^|/)(app_process|dalvikvm)(|32|64)$ ]]; then |
| echo >> "$OUT_ROOT/gdbclient.cmds" "art-on" |
| fi |
| echo >>"$OUT_ROOT/gdbclient.cmds" "" |
| |
| local WHICH_GDB= |
| # 64-bit exe found |
| if [ "$USE64BIT" != "" ] ; then |
| WHICH_GDB=$ANDROID_TOOLCHAIN/$GDB64 |
| # 32-bit exe / 32-bit platform |
| elif [ "$(get_build_var TARGET_2ND_ARCH)" = "" ]; then |
| WHICH_GDB=$ANDROID_TOOLCHAIN/$GDB |
| # 32-bit exe / 64-bit platform |
| else |
| WHICH_GDB=$ANDROID_TOOLCHAIN_2ND_ARCH/$GDB |
| fi |
| |
| gdbwrapper $WHICH_GDB "$OUT_ROOT/gdbclient.cmds" "$OUT_EXE_SYMBOLS/$EXE" |
| else |
| echo "Unable to determine build system output dir." |
| fi |
| |
| } |
| |
| function dddclient() |
| { |
| local OUT_ROOT=$(get_abs_build_var PRODUCT_OUT) |
| local OUT_SYMBOLS=$(get_abs_build_var TARGET_OUT_UNSTRIPPED) |
| local OUT_SO_SYMBOLS=$(get_abs_build_var TARGET_OUT_SHARED_LIBRARIES_UNSTRIPPED) |
| local OUT_VENDOR_SO_SYMBOLS=$(get_abs_build_var TARGET_OUT_VENDOR_SHARED_LIBRARIES_UNSTRIPPED) |
| local OUT_EXE_SYMBOLS=$(get_symbols_directory) |
| local PREBUILTS=$(get_abs_build_var ANDROID_PREBUILTS) |
| local ARCH=$(get_build_var TARGET_ARCH) |
| local GDB |
| case "$ARCH" in |
| arm) GDB=arm-linux-androideabi-gdb;; |
| arm64) GDB=arm-linux-androideabi-gdb; GDB64=aarch64-linux-android-gdb;; |
| mips|mips64) GDB=mips64el-linux-android-gdb;; |
| x86) GDB=x86_64-linux-android-gdb;; |
| x86_64) GDB=x86_64-linux-android-gdb;; |
| *) echo "Unknown arch $ARCH"; return 1;; |
| esac |
| |
| if [ "$OUT_ROOT" -a "$PREBUILTS" ]; then |
| local EXE="$1" |
| if [ "$EXE" ] ; then |
| EXE=$1 |
| if [[ $EXE =~ ^[^/].* ]] ; then |
| EXE="system/bin/"$EXE |
| fi |
| else |
| EXE="app_process" |
| fi |
| |
| local PORT="$2" |
| if [ "$PORT" ] ; then |
| PORT=$2 |
| else |
| PORT=":5039" |
| fi |
| |
| local PID="$3" |
| if [ "$PID" ] ; then |
| if [[ ! "$PID" =~ ^[0-9]+$ ]] ; then |
| PID=`pid $3` |
| if [[ ! "$PID" =~ ^[0-9]+$ ]] ; then |
| # that likely didn't work because of returning multiple processes |
| # try again, filtering by root processes (don't contain colon) |
| PID=`adb shell ps | \grep $3 | \grep -v ":" | awk '{print $2}'` |
| if [[ ! "$PID" =~ ^[0-9]+$ ]] |
| then |
| echo "Couldn't resolve '$3' to single PID" |
| return 1 |
| else |
| echo "" |
| echo "WARNING: multiple processes matching '$3' observed, using root process" |
| echo "" |
| fi |
| fi |
| fi |
| adb forward "tcp$PORT" "tcp$PORT" |
| local USE64BIT="$(is64bit $PID)" |
| adb shell gdbserver$USE64BIT $PORT --attach $PID & |
| sleep 2 |
| else |
| echo "" |
| echo "If you haven't done so already, do this first on the device:" |
| echo " gdbserver $PORT /system/bin/$EXE" |
| echo " or" |
| echo " gdbserver $PORT --attach <PID>" |
| echo "" |
| fi |
| |
| OUT_SO_SYMBOLS=$OUT_SO_SYMBOLS$USE64BIT |
| OUT_VENDOR_SO_SYMBOLS=$OUT_VENDOR_SO_SYMBOLS$USE64BIT |
| |
| echo >|"$OUT_ROOT/gdbclient.cmds" "set solib-absolute-prefix $OUT_SYMBOLS" |
| echo >>"$OUT_ROOT/gdbclient.cmds" "set solib-search-path $OUT_SO_SYMBOLS:$OUT_SO_SYMBOLS/hw:$OUT_SO_SYMBOLS/ssl/engines:$OUT_SO_SYMBOLS/drm:$OUT_SO_SYMBOLS/egl:$OUT_SO_SYMBOLS/soundfx:$OUT_VENDOR_SO_SYMBOLS:$OUT_VENDOR_SO_SYMBOLS/hw:$OUT_VENDOR_SO_SYMBOLS/egl" |
| echo >>"$OUT_ROOT/gdbclient.cmds" "source $ANDROID_BUILD_TOP/development/scripts/gdb/dalvik.gdb" |
| echo >>"$OUT_ROOT/gdbclient.cmds" "target remote $PORT" |
| # Enable special debugging for ART processes. |
| if [[ $EXE =~ (^|/)(app_process|dalvikvm)(|32|64)$ ]]; then |
| echo >> "$OUT_ROOT/gdbclient.cmds" "art-on" |
| fi |
| echo >>"$OUT_ROOT/gdbclient.cmds" "" |
| |
| local WHICH_GDB= |
| # 64-bit exe found |
| if [ "$USE64BIT" != "" ] ; then |
| WHICH_GDB=$ANDROID_TOOLCHAIN/$GDB64 |
| # 32-bit exe / 32-bit platform |
| elif [ "$(get_build_var TARGET_2ND_ARCH)" = "" ]; then |
| WHICH_GDB=$ANDROID_TOOLCHAIN/$GDB |
| # 32-bit exe / 64-bit platform |
| else |
| WHICH_GDB=$ANDROID_TOOLCHAIN_2ND_ARCH/$GDB |
| fi |
| |
| ddd --debugger $WHICH_GDB -x "$OUT_ROOT/gdbclient.cmds" "$OUT_EXE_SYMBOLS/$EXE" |
| else |
| echo "Unable to determine build system output dir." |
| fi |
| } |
| |
| |
| case `uname -s` in |
| Darwin) |
| function sgrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cc|cpp|S|java|xml|sh|mk|aidl)' -print0 | xargs -0 grep --color -n "$@" |
| } |
| |
| ;; |
| *) |
| function sgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.\(c\|h\|cc\|cpp\|S\|java\|xml\|sh\|mk\|aidl\)' -print0 | xargs -0 grep --color -n "$@" |
| } |
| ;; |
| esac |
| |
| function gettargetarch |
| { |
| get_build_var TARGET_ARCH |
| } |
| |
| function ggrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.gradle" -print0 | xargs -0 grep --color -n "$@" |
| } |
| |
| function jgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.java" -print0 | xargs -0 grep --color -n "$@" |
| } |
| |
| function cgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f \( -name '*.c' -o -name '*.cc' -o -name '*.cpp' -o -name '*.h' \) -print0 | xargs -0 grep --color -n "$@" |
| } |
| |
| function resgrep() |
| { |
| for dir in `find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -name res -type d`; do find $dir -type f -name '*\.xml' -print0 | xargs -0 grep --color -n "$@"; done; |
| } |
| |
| function mangrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'AndroidManifest.xml' -print0 | xargs -0 grep --color -n "$@" |
| } |
| |
| function sepgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -name sepolicy -type d -print0 | xargs -0 grep --color -n -r --exclude-dir=\.git "$@" |
| } |
| |
| case `uname -s` in |
| Darwin) |
| function mgrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -iregex '.*/(Makefile|Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -print0 | xargs -0 grep --color -n "$@" |
| } |
| |
| function treegrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|S|java|xml)' -print0 | xargs -0 grep --color -n -i "$@" |
| } |
| |
| ;; |
| *) |
| function mgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -regextype posix-egrep -iregex '(.*\/Makefile|.*\/Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -type f -print0 | xargs -0 grep --color -n "$@" |
| } |
| |
| function treegrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|S|java|xml)' -type f -print0 | xargs -0 grep --color -n -i "$@" |
| } |
| |
| ;; |
| esac |
| |
| function getprebuilt |
| { |
| get_abs_build_var ANDROID_PREBUILTS |
| } |
| |
| function tracedmdump() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return |
| fi |
| local prebuiltdir=$(getprebuilt) |
| local arch=$(gettargetarch) |
| local KERNEL=$T/prebuilts/qemu-kernel/$arch/vmlinux-qemu |
| |
| local TRACE=$1 |
| if [ ! "$TRACE" ] ; then |
| echo "usage: tracedmdump tracename" |
| return |
| fi |
| |
| if [ ! -r "$KERNEL" ] ; then |
| echo "Error: cannot find kernel: '$KERNEL'" |
| return |
| fi |
| |
| local BASETRACE=$(basename $TRACE) |
| if [ "$BASETRACE" = "$TRACE" ] ; then |
| TRACE=$ANDROID_PRODUCT_OUT/traces/$TRACE |
| fi |
| |
| echo "post-processing traces..." |
| rm -f $TRACE/qtrace.dexlist |
| post_trace $TRACE |
| if [ $? -ne 0 ]; then |
| echo "***" |
| echo "*** Error: malformed trace. Did you remember to exit the emulator?" |
| echo "***" |
| return |
| fi |
| echo "generating dexlist output..." |
| /bin/ls $ANDROID_PRODUCT_OUT/system/framework/*.jar $ANDROID_PRODUCT_OUT/system/app/*.apk $ANDROID_PRODUCT_OUT/data/app/*.apk 2>/dev/null | xargs dexlist > $TRACE/qtrace.dexlist |
| echo "generating dmtrace data..." |
| q2dm -r $ANDROID_PRODUCT_OUT/symbols $TRACE $KERNEL $TRACE/dmtrace || return |
| echo "generating html file..." |
| dmtracedump -h $TRACE/dmtrace >| $TRACE/dmtrace.html || return |
| echo "done, see $TRACE/dmtrace.html for details" |
| echo "or run:" |
| echo " traceview $TRACE/dmtrace" |
| } |
| |
| # communicate with a running device or emulator, set up necessary state, |
| # and run the hat command. |
| function runhat() |
| { |
| # process standard adb options |
| local adbTarget="" |
| if [ "$1" = "-d" -o "$1" = "-e" ]; then |
| adbTarget=$1 |
| shift 1 |
| elif [ "$1" = "-s" ]; then |
| adbTarget="$1 $2" |
| shift 2 |
| fi |
| local adbOptions=${adbTarget} |
| #echo adbOptions = ${adbOptions} |
| |
| # runhat options |
| local targetPid=$1 |
| |
| if [ "$targetPid" = "" ]; then |
| echo "Usage: runhat [ -d | -e | -s serial ] target-pid" |
| return |
| fi |
| |
| # confirm hat is available |
| if [ -z $(which hat) ]; then |
| echo "hat is not available in this configuration." |
| return |
| fi |
| |
| # issue "am" command to cause the hprof dump |
| local devFile=/data/local/tmp/hprof-$targetPid |
| echo "Poking $targetPid and waiting for data..." |
| echo "Storing data at $devFile" |
| adb ${adbOptions} shell am dumpheap $targetPid $devFile |
| echo "Press enter when logcat shows \"hprof: heap dump completed\"" |
| echo -n "> " |
| read |
| |
| local localFile=/tmp/$$-hprof |
| |
| echo "Retrieving file $devFile..." |
| adb ${adbOptions} pull $devFile $localFile |
| |
| adb ${adbOptions} shell rm $devFile |
| |
| echo "Running hat on $localFile" |
| echo "View the output by pointing your browser at http://localhost:7000/" |
| echo "" |
| hat -JXmx512m $localFile |
| } |
| |
| function getbugreports() |
| { |
| local reports=(`adb shell ls /sdcard/bugreports | tr -d '\r'`) |
| |
| if [ ! "$reports" ]; then |
| echo "Could not locate any bugreports." |
| return |
| fi |
| |
| local report |
| for report in ${reports[@]} |
| do |
| echo "/sdcard/bugreports/${report}" |
| adb pull /sdcard/bugreports/${report} ${report} |
| gunzip ${report} |
| done |
| } |
| |
| function getsdcardpath() |
| { |
| adb ${adbOptions} shell echo -n \$\{EXTERNAL_STORAGE\} |
| } |
| |
| function getscreenshotpath() |
| { |
| echo "$(getsdcardpath)/Pictures/Screenshots" |
| } |
| |
| function getlastscreenshot() |
| { |
| local screenshot_path=$(getscreenshotpath) |
| local screenshot=`adb ${adbOptions} ls ${screenshot_path} | grep Screenshot_[0-9-]*.*\.png | sort -rk 3 | cut -d " " -f 4 | head -n 1` |
| if [ "$screenshot" = "" ]; then |
| echo "No screenshots found." |
| return |
| fi |
| echo "${screenshot}" |
| adb ${adbOptions} pull ${screenshot_path}/${screenshot} |
| } |
| |
| function startviewserver() |
| { |
| local port=4939 |
| if [ $# -gt 0 ]; then |
| port=$1 |
| fi |
| adb shell service call window 1 i32 $port |
| } |
| |
| function stopviewserver() |
| { |
| adb shell service call window 2 |
| } |
| |
| function isviewserverstarted() |
| { |
| adb shell service call window 3 |
| } |
| |
| function key_home() |
| { |
| adb shell input keyevent 3 |
| } |
| |
| function key_back() |
| { |
| adb shell input keyevent 4 |
| } |
| |
| function key_menu() |
| { |
| adb shell input keyevent 82 |
| } |
| |
| function smoketest() |
| { |
| if [ ! "$ANDROID_PRODUCT_OUT" ]; then |
| echo "Couldn't locate output files. Try running 'lunch' first." >&2 |
| return |
| fi |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| |
| (\cd "$T" && mmm tests/SmokeTest) && |
| adb uninstall com.android.smoketest > /dev/null && |
| adb uninstall com.android.smoketest.tests > /dev/null && |
| adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTestApp.apk && |
| adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTest.apk && |
| adb shell am instrument -w com.android.smoketest.tests/android.test.InstrumentationTestRunner |
| } |
| |
| # simple shortcut to the runtest command |
| function runtest() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| ("$T"/development/testrunner/runtest.py $@) |
| } |
| |
| function godir () { |
| if [[ -z "$1" ]]; then |
| echo "Usage: godir <regex>" |
| return |
| fi |
| T=$(gettop) |
| if [[ ! -f $T/filelist ]]; then |
| echo -n "Creating index..." |
| (\cd $T; find . -wholename ./out -prune -o -wholename ./.repo -prune -o -type f > filelist) |
| echo " Done" |
| echo "" |
| fi |
| local lines |
| lines=($(\grep "$1" $T/filelist | sed -e 's/\/[^/]*$//' | sort | uniq)) |
| if [[ ${#lines[@]} = 0 ]]; then |
| echo "Not found" |
| return |
| fi |
| local pathname |
| local choice |
| if [[ ${#lines[@]} > 1 ]]; then |
| while [[ -z "$pathname" ]]; do |
| local index=1 |
| local line |
| for line in ${lines[@]}; do |
| printf "%6s %s\n" "[$index]" $line |
| index=$(($index + 1)) |
| done |
| echo |
| echo -n "Select one: " |
| unset choice |
| read choice |
| if [[ $choice -gt ${#lines[@]} || $choice -lt 1 ]]; then |
| echo "Invalid choice" |
| continue |
| fi |
| pathname=${lines[$(($choice-1))]} |
| done |
| else |
| pathname=${lines[0]} |
| fi |
| \cd $T/$pathname |
| } |
| |
| function cmremote() |
| { |
| git remote rm cmremote 2> /dev/null |
| GERRIT_REMOTE=$(git config --get remote.github.projectname) |
| if [ -z "$GERRIT_REMOTE" ] |
| then |
| echo Unable to set up the git remote, are you under a git repo? |
| return 0 |
| fi |
| CMUSER=$(git config --get review.review.cyanogenmod.org.username) |
| if [ -z "$CMUSER" ] |
| then |
| git remote add cmremote ssh://review.cyanogenmod.org:29418/$GERRIT_REMOTE |
| else |
| git remote add cmremote ssh://$CMUSER@review.cyanogenmod.org:29418/$GERRIT_REMOTE |
| fi |
| echo You can now push to "cmremote". |
| } |
| |
| function aospremote() |
| { |
| git remote rm aosp 2> /dev/null |
| if [ ! -d .git ] |
| then |
| echo .git directory not found. Please run this from the root directory of the Android repository you wish to set up. |
| fi |
| PROJECT=`pwd -P | sed s#$ANDROID_BUILD_TOP/##g` |
| if (echo $PROJECT | grep -qv "^device") |
| then |
| PFX="platform/" |
| fi |
| git remote add aosp https://android.googlesource.com/$PFX$PROJECT |
| echo "Remote 'aosp' created" |
| } |
| |
| function cafremote() |
| { |
| git remote rm caf 2> /dev/null |
| if [ ! -d .git ] |
| then |
| echo .git directory not found. Please run this from the root directory of the Android repository you wish to set up. |
| fi |
| PROJECT=`pwd -P | sed s#$ANDROID_BUILD_TOP/##g` |
| if (echo $PROJECT | grep -qv "^device") |
| then |
| PFX="platform/" |
| fi |
| git remote add caf git://codeaurora.org/$PFX$PROJECT |
| echo "Remote 'caf' created" |
| } |
| |
| function installboot() |
| { |
| if [ ! -e "$OUT/recovery/root/etc/recovery.fstab" ]; |
| then |
| echo "No recovery.fstab found. Build recovery first." |
| return 1 |
| fi |
| if [ ! -e "$OUT/boot.img" ]; |
| then |
| echo "No boot.img found. Run make bootimage first." |
| return 1 |
| fi |
| PARTITION=`grep "^\/boot" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` |
| if [ -z "$PARTITION" ]; |
| then |
| # Try for RECOVERY_FSTAB_VERSION = 2 |
| PARTITION=`grep "[[:space:]]\/boot[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $1'}` |
| PARTITION_TYPE=`grep "[[:space:]]\/boot[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` |
| if [ -z "$PARTITION" ]; |
| then |
| echo "Unable to determine boot partition." |
| return 1 |
| fi |
| fi |
| adb start-server |
| adb wait-for-online |
| adb root |
| sleep 1 |
| adb wait-for-online shell mount /system 2>&1 > /dev/null |
| adb wait-for-online remount |
| if (adb shell cat /system/build.prop | grep -q "ro.ch.device=$CH_BUILD"); |
| then |
| adb push $OUT/boot.img /cache/ |
| for i in $OUT/system/lib/modules/*; |
| do |
| adb push $i /system/lib/modules/ |
| done |
| adb shell dd if=/cache/boot.img of=$PARTITION |
| adb shell chmod 644 /system/lib/modules/* |
| echo "Installation complete." |
| else |
| echo "The connected device does not appear to be $CH_BUILD, run away!" |
| fi |
| } |
| |
| function installrecovery() |
| { |
| if [ ! -e "$OUT/recovery/root/etc/recovery.fstab" ]; |
| then |
| echo "No recovery.fstab found. Build recovery first." |
| return 1 |
| fi |
| if [ ! -e "$OUT/recovery.img" ]; |
| then |
| echo "No recovery.img found. Run make recoveryimage first." |
| return 1 |
| fi |
| PARTITION=`grep "^\/recovery" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` |
| if [ -z "$PARTITION" ]; |
| then |
| # Try for RECOVERY_FSTAB_VERSION = 2 |
| PARTITION=`grep "[[:space:]]\/recovery[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $1'}` |
| PARTITION_TYPE=`grep "[[:space:]]\/recovery[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` |
| if [ -z "$PARTITION" ]; |
| then |
| echo "Unable to determine recovery partition." |
| return 1 |
| fi |
| fi |
| adb start-server |
| adb wait-for-online |
| adb root |
| sleep 1 |
| adb wait-for-online shell mount /system 2>&1 >> /dev/null |
| adb wait-for-online remount |
| if (adb shell cat /system/build.prop | grep -q "ro.ch.device=$CH_BUILD"); |
| then |
| adb push $OUT/recovery.img /cache/ |
| adb shell dd if=/cache/recovery.img of=$PARTITION |
| echo "Installation complete." |
| else |
| echo "The connected device does not appear to be $CH_BUILD, run away!" |
| fi |
| } |
| |
| function makerecipe() { |
| if [ -z "$1" ] |
| then |
| echo "No branch name provided." |
| return 1 |
| fi |
| cd android |
| sed -i s/'default revision=.*'/'default revision="refs\/heads\/'$1'"'/ default.xml |
| git commit -a -m "$1" |
| cd .. |
| |
| repo forall -c ' |
| |
| if [ "$REPO_REMOTE" == "github" ] |
| then |
| pwd |
| cmremote |
| git push cmremote HEAD:refs/heads/'$1' |
| fi |
| ' |
| } |
| |
| function cmgerrit() { |
| if [ $# -eq 0 ]; then |
| $FUNCNAME help |
| return 1 |
| fi |
| local user=`git config --get review.review.cyanogenmod.org.username` |
| local review=`git config --get remote.github.review` |
| local project=`git config --get remote.github.projectname` |
| local command=$1 |
| shift |
| case $command in |
| help) |
| if [ $# -eq 0 ]; then |
| cat <<EOF |
| Usage: |
| $FUNCNAME COMMAND [OPTIONS] [CHANGE-ID[/PATCH-SET]][{@|^|~|:}ARG] [-- ARGS] |
| |
| Commands: |
| fetch Just fetch the change as FETCH_HEAD |
| help Show this help, or for a specific command |
| pull Pull a change into current branch |
| push Push HEAD or a local branch to Gerrit for a specific branch |
| |
| Any other Git commands that support refname would work as: |
| git fetch URL CHANGE && git COMMAND OPTIONS FETCH_HEAD{@|^|~|:}ARG -- ARGS |
| |
| See '$FUNCNAME help COMMAND' for more information on a specific command. |
| |
| Example: |
| $FUNCNAME checkout -b topic 1234/5 |
| works as: |
| git fetch http://DOMAIN/p/PROJECT refs/changes/34/1234/5 \\ |
| && git checkout -b topic FETCH_HEAD |
| will checkout a new branch 'topic' base on patch-set 5 of change 1234. |
| Patch-set 1 will be fetched if omitted. |
| EOF |
| return |
| fi |
| case $1 in |
| __cmg_*) echo "For internal use only." ;; |
| changes|for) |
| if [ "$FUNCNAME" = "cmgerrit" ]; then |
| echo "'$FUNCNAME $1' is deprecated." |
| fi |
| ;; |
| help) $FUNCNAME help ;; |
| fetch|pull) cat <<EOF |
| usage: $FUNCNAME $1 [OPTIONS] CHANGE-ID[/PATCH-SET] |
| |
| works as: |
| git $1 OPTIONS http://DOMAIN/p/PROJECT \\ |
| refs/changes/HASH/CHANGE-ID/{PATCH-SET|1} |
| |
| Example: |
| $FUNCNAME $1 1234 |
| will $1 patch-set 1 of change 1234 |
| EOF |
| ;; |
| push) cat <<EOF |
| usage: $FUNCNAME push [OPTIONS] [LOCAL_BRANCH:]REMOTE_BRANCH |
| |
| works as: |
| git push OPTIONS ssh://USER@DOMAIN:29418/PROJECT \\ |
| {LOCAL_BRANCH|HEAD}:refs/for/REMOTE_BRANCH |
| |
| Example: |
| $FUNCNAME push fix6789:gingerbread |
| will push local branch 'fix6789' to Gerrit for branch 'gingerbread'. |
| HEAD will be pushed from local if omitted. |
| EOF |
| ;; |
| *) |
| $FUNCNAME __cmg_err_not_supported $1 && return |
| cat <<EOF |
| usage: $FUNCNAME $1 [OPTIONS] CHANGE-ID[/PATCH-SET][{@|^|~|:}ARG] [-- ARGS] |
| |
| works as: |
| git fetch http://DOMAIN/p/PROJECT \\ |
| refs/changes/HASH/CHANGE-ID/{PATCH-SET|1} \\ |
| && git $1 OPTIONS FETCH_HEAD{@|^|~|:}ARG -- ARGS |
| EOF |
| ;; |
| esac |
| ;; |
| __cmg_get_ref) |
| $FUNCNAME __cmg_err_no_arg $command $# && return 1 |
| local change_id patchset_id hash |
| case $1 in |
| */*) |
| change_id=${1%%/*} |
| patchset_id=${1#*/} |
| ;; |
| *) |
| change_id=$1 |
| patchset_id=1 |
| ;; |
| esac |
| hash=$(($change_id % 100)) |
| case $hash in |
| [0-9]) hash="0$hash" ;; |
| esac |
| echo "refs/changes/$hash/$change_id/$patchset_id" |
| ;; |
| fetch|pull) |
| $FUNCNAME __cmg_err_no_arg $command $# help && return 1 |
| $FUNCNAME __cmg_err_not_repo && return 1 |
| local change=$1 |
| shift |
| git $command $@ http://$review/p/$project \ |
| $($FUNCNAME __cmg_get_ref $change) || return 1 |
| ;; |
| push) |
| $FUNCNAME __cmg_err_no_arg $command $# help && return 1 |
| $FUNCNAME __cmg_err_not_repo && return 1 |
| if [ -z "$user" ]; then |
| echo >&2 "Gerrit username not found." |
| return 1 |
| fi |
| local local_branch remote_branch |
| case $1 in |
| *:*) |
| local_branch=${1%:*} |
| remote_branch=${1##*:} |
| ;; |
| *) |
| local_branch=HEAD |
| remote_branch=$1 |
| ;; |
| esac |
| shift |
| git push $@ ssh://$user@$review:29418/$project \ |
| $local_branch:refs/for/$remote_branch || return 1 |
| ;; |
| changes|for) |
| if [ "$FUNCNAME" = "cmgerrit" ]; then |
| echo >&2 "'$FUNCNAME $command' is deprecated." |
| fi |
| ;; |
| __cmg_err_no_arg) |
| if [ $# -lt 2 ]; then |
| echo >&2 "'$FUNCNAME $command' missing argument." |
| elif [ $2 -eq 0 ]; then |
| if [ -n "$3" ]; then |
| $FUNCNAME help $1 |
| else |
| echo >&2 "'$FUNCNAME $1' missing argument." |
| fi |
| else |
| return 1 |
| fi |
| ;; |
| __cmg_err_not_repo) |
| if [ -z "$review" -o -z "$project" ]; then |
| echo >&2 "Not currently in any reviewable repository." |
| else |
| return 1 |
| fi |
| ;; |
| __cmg_err_not_supported) |
| $FUNCNAME __cmg_err_no_arg $command $# && return |
| case $1 in |
| #TODO: filter more git commands that don't use refname |
| init|add|rm|mv|status|clone|remote|bisect|config|stash) |
| echo >&2 "'$FUNCNAME $1' is not supported." |
| ;; |
| *) return 1 ;; |
| esac |
| ;; |
| #TODO: other special cases? |
| *) |
| $FUNCNAME __cmg_err_not_supported $command && return 1 |
| $FUNCNAME __cmg_err_no_arg $command $# help && return 1 |
| $FUNCNAME __cmg_err_not_repo && return 1 |
| local args="$@" |
| local change pre_args refs_arg post_args |
| case "$args" in |
| *--\ *) |
| pre_args=${args%%-- *} |
| post_args="-- ${args#*-- }" |
| ;; |
| *) pre_args="$args" ;; |
| esac |
| args=($pre_args) |
| pre_args= |
| if [ ${#args[@]} -gt 0 ]; then |
| change=${args[${#args[@]}-1]} |
| fi |
| if [ ${#args[@]} -gt 1 ]; then |
| pre_args=${args[0]} |
| for ((i=1; i<${#args[@]}-1; i++)); do |
| pre_args="$pre_args ${args[$i]}" |
| done |
| fi |
| while ((1)); do |
| case $change in |
| ""|--) |
| $FUNCNAME help $command |
| return 1 |
| ;; |
| *@*) |
| if [ -z "$refs_arg" ]; then |
| refs_arg="@${change#*@}" |
| change=${change%%@*} |
| fi |
| ;; |
| *~*) |
| if [ -z "$refs_arg" ]; then |
| refs_arg="~${change#*~}" |
| change=${change%%~*} |
| fi |
| ;; |
| *^*) |
| if [ -z "$refs_arg" ]; then |
| refs_arg="^${change#*^}" |
| change=${change%%^*} |
| fi |
| ;; |
| *:*) |
| if [ -z "$refs_arg" ]; then |
| refs_arg=":${change#*:}" |
| change=${change%%:*} |
| fi |
| ;; |
| *) break ;; |
| esac |
| done |
| $FUNCNAME fetch $change \ |
| && git $command $pre_args FETCH_HEAD$refs_arg $post_args \ |
| || return 1 |
| ;; |
| esac |
| } |
| |
| function cmrebase() { |
| local repo=$1 |
| local refs=$2 |
| local pwd="$(pwd)" |
| local dir="$(gettop)/$repo" |
| |
| if [ -z $repo ] || [ -z $refs ]; then |
| echo "CyanogenMod Gerrit Rebase Usage: " |
| echo " cmrebase <path to project> <patch IDs on Gerrit>" |
| echo " The patch IDs appear on the Gerrit commands that are offered." |
| echo " They consist on a series of numbers and slashes, after the text" |
| echo " refs/changes. For example, the ID in the following command is 26/8126/2" |
| echo "" |
| echo " git[...]ges_apps_Camera refs/changes/26/8126/2 && git cherry-pick FETCH_HEAD" |
| echo "" |
| return |
| fi |
| |
| if [ ! -d $dir ]; then |
| echo "Directory $dir doesn't exist in tree." |
| return |
| fi |
| cd $dir |
| repo=$(cat .git/config | grep git://github.com | awk '{ print $NF }' | sed s#git://github.com/##g) |
| echo "Starting branch..." |
| repo start tmprebase . |
| echo "Bringing it up to date..." |
| repo sync . |
| echo "Fetching change..." |
| git fetch "http://review.cyanogenmod.org/p/$repo" "refs/changes/$refs" && git cherry-pick FETCH_HEAD |
| if [ "$?" != "0" ]; then |
| echo "Error cherry-picking. Not uploading!" |
| return |
| fi |
| echo "Uploading..." |
| repo upload . |
| echo "Cleaning up..." |
| repo abandon tmprebase . |
| cd $pwd |
| } |
| |
| function mka() { |
| case `uname -s` in |
| Darwin) |
| make -j `sysctl hw.ncpu|cut -d" " -f2` "$@" |
| ;; |
| *) |
| schedtool -B -n 1 -e ionice -n 1 make -j$(cat /proc/cpuinfo | grep "^processor" | wc -l) "$@" |
| ;; |
| esac |
| } |
| |
| function cmka() { |
| if [ ! -z "$1" ]; then |
| for i in "$@"; do |
| case $i in |
| bacon|otapackage|systemimage) |
| mka installclean |
| mka $i |
| ;; |
| *) |
| mka clean-$i |
| mka $i |
| ;; |
| esac |
| done |
| else |
| mka clean |
| mka |
| fi |
| } |
| |
| function reposync() { |
| case `uname -s` in |
| Darwin) |
| repo sync -j 4 "$@" |
| ;; |
| *) |
| schedtool -B -n 1 -e ionice -n 1 `which repo` sync -j 4 "$@" |
| ;; |
| esac |
| } |
| |
| function repodiff() { |
| if [ -z "$*" ]; then |
| echo "Usage: repodiff <ref-from> [[ref-to] [--numstat]]" |
| return |
| fi |
| diffopts=$* repo forall -c \ |
| 'echo "$REPO_PATH ($REPO_REMOTE)"; git diff ${diffopts} 2>/dev/null ;' |
| } |
| |
| # Credit for color strip sed: http://goo.gl/BoIcm |
| function dopush() |
| { |
| local func=$1 |
| shift |
| |
| adb start-server # Prevent unexpected starting server message from adb get-state in the next line |
| if [ $(adb get-state) != device -a $(adb shell busybox test -e /sbin/recovery 2> /dev/null; echo $?) != 0 ] ; then |
| echo "No device is online. Waiting for one..." |
| echo "Please connect USB and/or enable USB debugging" |
| until [ $(adb get-state) = device -o $(adb shell busybox test -e /sbin/recovery 2> /dev/null; echo $?) = 0 ];do |
| sleep 1 |
| done |
| echo "Device Found." |
| fi |
| |
| if (adb shell cat /system/build.prop | grep -q "ro.ch.device=$CH_BUILD"); |
| then |
| # retrieve IP and PORT info if we're using a TCP connection |
| TCPIPPORT=$(adb devices | egrep '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+:[0-9]+[^0-9]+' \ |
| | head -1 | awk '{print $1}') |
| adb root &> /dev/null |
| sleep 0.3 |
| if [ -n "$TCPIPPORT" ] |
| then |
| # adb root just killed our connection |
| # so reconnect... |
| adb connect "$TCPIPPORT" |
| fi |
| adb wait-for-device &> /dev/null |
| sleep 0.3 |
| adb remount &> /dev/null |
| |
| mkdir -p $OUT |
| $func $* | tee $OUT/.log |
| |
| # Install: <file> |
| LOC="$(cat $OUT/.log | sed -r 's/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g' | grep '^Install: ' | cut -d ':' -f 2)" |
| |
| # Copy: <file> |
| LOC="$LOC $(cat $OUT/.log | sed -r 's/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g' | grep '^Copy: ' | cut -d ':' -f 2)" |
| |
| # If any files are going to /data, push an octal file permissions reader to device |
| if [ -n "$(echo $LOC | egrep '(^|\s)/data')" ]; then |
| CHKPERM="/data/local/tmp/chkfileperm.sh" |
| ( |
| cat <<'EOF' |
| #!/system/xbin/sh |
| FILE=$@ |
| if [ -e $FILE ]; then |
| ls -l $FILE | awk '{k=0;for(i=0;i<=8;i++)k+=((substr($1,i+2,1)~/[rwx]/)*2^(8-i));if(k)printf("%0o ",k);print}' | cut -d ' ' -f1 |
| fi |
| EOF |
| ) > $OUT/.chkfileperm.sh |
| echo "Pushing file permissions checker to device" |
| adb push $OUT/.chkfileperm.sh $CHKPERM |
| adb shell chmod 755 $CHKPERM |
| rm -f $OUT/.chkfileperm.sh |
| fi |
| |
| stop_n_start=false |
| for FILE in $LOC; do |
| # Make sure file is in $OUT/system or $OUT/data |
| case $FILE in |
| $OUT/system/*|$OUT/data/*) |
| # Get target file name (i.e. /system/bin/adb) |
| TARGET=$(echo $FILE | sed "s#$OUT##") |
| ;; |
| *) continue ;; |
| esac |
| |
| case $TARGET in |
| /data/*) |
| # fs_config only sets permissions and se labels for files pushed to /system |
| if [ -n "$CHKPERM" ]; then |
| OLDPERM=$(adb shell $CHKPERM $TARGET) |
| OLDPERM=$(echo $OLDPERM | tr -d '\r' | tr -d '\n') |
| OLDOWN=$(adb shell ls -al $TARGET | awk '{print $2}') |
| OLDGRP=$(adb shell ls -al $TARGET | awk '{print $3}') |
| fi |
| echo "Pushing: $TARGET" |
| adb push $FILE $TARGET |
| if [ -n "$OLDPERM" ]; then |
| echo "Setting file permissions: $OLDPERM, $OLDOWN":"$OLDGRP" |
| adb shell chown "$OLDOWN":"$OLDGRP" $TARGET |
| adb shell chmod "$OLDPERM" $TARGET |
| else |
| echo "$TARGET did not exist previously, you should set file permissions manually" |
| fi |
| adb shell restorecon "$TARGET" |
| ;; |
| /system/priv-app/SystemUI/SystemUI.apk|/system/framework/*) |
| # Only need to stop services once |
| if ! $stop_n_start; then |
| adb shell stop |
| stop_n_start=true |
| fi |
| echo "Pushing: $TARGET" |
| adb push $FILE $TARGET |
| ;; |
| *) |
| echo "Pushing: $TARGET" |
| adb push $FILE $TARGET |
| ;; |
| esac |
| done |
| if [ -n "$CHKPERM" ]; then |
| adb shell rm $CHKPERM |
| fi |
| if $stop_n_start; then |
| adb shell start |
| fi |
| rm -f $OUT/.log |
| return 0 |
| else |
| echo "The connected device does not appear to be $CH_BUILD, run away!" |
| fi |
| } |
| |
| alias mmp='dopush mm' |
| alias mmmp='dopush mmm' |
| alias mkap='dopush mka' |
| alias cmkap='dopush cmka' |
| |
| function repopick() { |
| T=$(gettop) |
| $T/build/tools/repopick.py $@ |
| } |
| |
| function fixup_common_out_dir() { |
| common_out_dir=$(get_build_var OUT_DIR)/target/common |
| target_device=$(get_build_var TARGET_DEVICE) |
| if [ ! -z $CH_FIXUP_COMMON_OUT ]; then |
| if [ -d ${common_out_dir} ] && [ ! -L ${common_out_dir} ]; then |
| mv ${common_out_dir} ${common_out_dir}-${target_device} |
| ln -s ${common_out_dir}-${target_device} ${common_out_dir} |
| else |
| [ -L ${common_out_dir} ] && rm ${common_out_dir} |
| mkdir -p ${common_out_dir}-${target_device} |
| ln -s ${common_out_dir}-${target_device} ${common_out_dir} |
| fi |
| else |
| [ -L ${common_out_dir} ] && rm ${common_out_dir} |
| mkdir -p ${common_out_dir} |
| fi |
| } |
| |
| # Force JAVA_HOME to point to java 1.7 or java 1.6 if it isn't already set. |
| # |
| # Note that the MacOS path for java 1.7 includes a minor revision number (sigh). |
| # For some reason, installing the JDK doesn't make it show up in the |
| # JavaVM.framework/Versions/1.7/ folder. |
| function set_java_home() { |
| # Clear the existing JAVA_HOME value if we set it ourselves, so that |
| # we can reset it later, depending on the version of java the build |
| # system needs. |
| # |
| # If we don't do this, the JAVA_HOME value set by the first call to |
| # build/envsetup.sh will persist forever. |
| if [ -n "$ANDROID_SET_JAVA_HOME" ]; then |
| export JAVA_HOME="" |
| fi |
| |
| if [ ! "$JAVA_HOME" ]; then |
| if [ -n "$LEGACY_USE_JAVA6" ]; then |
| case `uname -s` in |
| Darwin) |
| export JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home |
| ;; |
| *) |
| export JAVA_HOME=/usr/lib/jvm/java-6-sun |
| ;; |
| esac |
| else |
| case `uname -s` in |
| Darwin) |
| export JAVA_HOME=$(/usr/libexec/java_home -v 1.7) |
| ;; |
| *) |
| export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64 |
| ;; |
| esac |
| fi |
| |
| # Keep track of the fact that we set JAVA_HOME ourselves, so that |
| # we can change it on the next envsetup.sh, if required. |
| export ANDROID_SET_JAVA_HOME=true |
| fi |
| } |
| |
| # Print colored exit condition |
| function pez { |
| "$@" |
| local retval=$? |
| if [ $retval -ne 0 ] |
| then |
| echo -e "\e[0;31mFAILURE\e[00m" |
| else |
| echo -e "\e[0;32mSUCCESS\e[00m" |
| fi |
| return $retval |
| } |
| |
| function get_make_command() |
| { |
| echo command make |
| } |
| |
| function make() |
| { |
| local start_time=$(date +"%s") |
| $(get_make_command) "$@" |
| local ret=$? |
| local end_time=$(date +"%s") |
| local tdiff=$(($end_time-$start_time)) |
| local hours=$(($tdiff / 3600 )) |
| local mins=$((($tdiff % 3600) / 60)) |
| local secs=$(($tdiff % 60)) |
| echo |
| if [ $ret -eq 0 ] ; then |
| echo -n -e "#### make completed successfully " |
| else |
| echo -n -e "#### make failed to build some targets " |
| fi |
| if [ $hours -gt 0 ] ; then |
| printf "(%02g:%02g:%02g (hh:mm:ss))" $hours $mins $secs |
| elif [ $mins -gt 0 ] ; then |
| printf "(%02g:%02g (mm:ss))" $mins $secs |
| elif [ $secs -gt 0 ] ; then |
| printf "(%s seconds)" $secs |
| fi |
| echo -e " ####" |
| echo |
| return $ret |
| } |
| |
| |
| |
| if [ "x$SHELL" != "x/bin/bash" ]; then |
| case `ps -o command -p $$` in |
| *bash*) |
| ;; |
| *zsh*) |
| ;; |
| *) |
| echo "WARNING: Only bash and zsh are supported, use of other shell may lead to erroneous results" |
| ;; |
| esac |
| fi |
| |
| # Execute the contents of any vendorsetup.sh files we can find. |
| for f in `test -d device && find -L device -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null` \ |
| `test -d vendor && find -L vendor -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null` |
| do |
| echo "including $f" |
| . $f |
| done |
| unset f |
| |
| # Add completions |
| check_bash_version && { |
| dirs="sdk/bash_completion vendor/ch/bash_completion" |
| for dir in $dirs; do |
| if [ -d ${dir} ]; then |
| for f in `/bin/ls ${dir}/[a-z]*.bash 2> /dev/null`; do |
| echo "including $f" |
| . $f |
| done |
| fi |
| done |
| } |
| |
| export ANDROID_BUILD_TOP=$(gettop) |