| /* |
| * Copyright 2012 The Android Open Source Project |
| * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * Not a Contribution. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /****************************************************************************** |
| * |
| * Filename: bt_vendor_qcom.c |
| * |
| * Description: vendor specific library implementation |
| * |
| ******************************************************************************/ |
| |
| #define LOG_TAG "bt_vendor" |
| #define BLUETOOTH_MAC_ADDR_BOOT_PROPERTY "ro.boot.btmacaddr" |
| |
| #include <utils/Log.h> |
| #include <cutils/properties.h> |
| #include <fcntl.h> |
| #include <termios.h> |
| #include "bt_vendor_qcom.h" |
| #include "hci_uart.h" |
| #include "hci_smd.h" |
| #include <sys/socket.h> |
| #include <cutils/sockets.h> |
| #include <linux/un.h> |
| #include "bt_vendor_persist.h" |
| #include "hw_rome.h" |
| #include "bt_vendor_lib.h" |
| #define WAIT_TIMEOUT 200000 |
| #define BT_VND_OP_GET_LINESPEED 12 |
| |
| #ifdef PANIC_ON_SOC_CRASH |
| #define BT_VND_FILTER_START "wc_transport.start_root" |
| #else |
| #define BT_VND_FILTER_START "wc_transport.start_hci" |
| #endif |
| |
| #define CMD_TIMEOUT 0x22 |
| |
| static void wait_for_patch_download(bool is_ant_req); |
| |
| /****************************************************************************** |
| ** Externs |
| ******************************************************************************/ |
| extern int hw_config(int nState); |
| |
| extern int is_hw_ready(); |
| extern int rome_soc_init(int fd, char *bdaddr); |
| extern int check_embedded_mode(int fd); |
| extern int rome_get_addon_feature_list(int fd); |
| extern int rome_ver; |
| extern int enable_controller_log(int fd, unsigned char req); |
| /****************************************************************************** |
| ** Variables |
| ******************************************************************************/ |
| int pFd[2] = {0,}; |
| #ifdef BT_SOC_TYPE_ROME |
| int ant_fd; |
| #endif |
| bt_vendor_callbacks_t *bt_vendor_cbacks = NULL; |
| uint8_t vnd_local_bd_addr[6]={0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; |
| static int btSocType = BT_SOC_DEFAULT; |
| static int rfkill_id = -1; |
| static char *rfkill_state = NULL; |
| bool enable_extldo = FALSE; |
| |
| int userial_clock_operation(int fd, int cmd); |
| int ath3k_init(int fd, int speed, int init_speed, char *bdaddr, struct termios *ti); |
| int rome_soc_init(int fd, char *bdaddr); |
| int userial_vendor_get_baud(void); |
| int readTrpState(); |
| void lpm_set_ar3k(uint8_t pio, uint8_t action, uint8_t polarity); |
| |
| static const tUSERIAL_CFG userial_init_cfg = |
| { |
| (USERIAL_DATABITS_8 | USERIAL_PARITY_NONE | USERIAL_STOPBITS_1), |
| USERIAL_BAUD_115200 |
| }; |
| |
| #if (HW_NEED_END_WITH_HCI_RESET == TRUE) |
| void hw_epilog_process(void); |
| #endif |
| |
| #ifdef WIFI_BT_STATUS_SYNC |
| #include <string.h> |
| #include <errno.h> |
| #include <dlfcn.h> |
| #include "cutils/properties.h" |
| |
| static const char WIFI_PROP_NAME[] = "wlan.driver.status"; |
| static const char SERVICE_PROP_NAME[] = "bluetooth.hsic_ctrl"; |
| static const char BT_STATUS_NAME[] = "bluetooth.enabled"; |
| static const char WIFI_SERVICE_PROP[] = "wlan.hsic_ctrl"; |
| |
| #define WIFI_BT_STATUS_LOCK "/data/connectivity/wifi_bt_lock" |
| int isInit=0; |
| #endif /* WIFI_BT_STATUS_SYNC */ |
| bool is_soc_initialized(void); |
| |
| /****************************************************************************** |
| ** Local type definitions |
| ******************************************************************************/ |
| |
| |
| /****************************************************************************** |
| ** Functions |
| ******************************************************************************/ |
| #ifdef WIFI_BT_STATUS_SYNC |
| int bt_semaphore_create(void) |
| { |
| int fd; |
| |
| fd = open(WIFI_BT_STATUS_LOCK, O_RDONLY); |
| |
| if (fd < 0) |
| ALOGE("can't create file\n"); |
| |
| return fd; |
| } |
| |
| int bt_semaphore_get(int fd) |
| { |
| int ret; |
| |
| if (fd < 0) |
| return -1; |
| |
| ret = flock(fd, LOCK_EX); |
| if (ret != 0) { |
| ALOGE("can't hold lock: %s\n", strerror(errno)); |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| int bt_semaphore_release(int fd) |
| { |
| int ret; |
| |
| if (fd < 0) |
| return -1; |
| |
| ret = flock(fd, LOCK_UN); |
| if (ret != 0) { |
| ALOGE("can't release lock: %s\n", strerror(errno)); |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| int bt_semaphore_destroy(int fd) |
| { |
| if (fd < 0) |
| return -1; |
| |
| return close (fd); |
| } |
| |
| int bt_wait_for_service_done(void) |
| { |
| char service_status[PROPERTY_VALUE_MAX]; |
| int count = 30; |
| |
| ALOGE("%s: check\n", __func__); |
| |
| /* wait for service done */ |
| while (count-- > 0) { |
| property_get(WIFI_SERVICE_PROP, service_status, NULL); |
| |
| if (strcmp(service_status, "") != 0) { |
| usleep(200000); |
| } else { |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| #endif /* WIFI_BT_STATUS_SYNC */ |
| |
| /** Get Bluetooth SoC type from system setting */ |
| static int get_bt_soc_type() |
| { |
| int ret = 0; |
| char bt_soc_type[PROPERTY_VALUE_MAX]; |
| |
| ALOGI("bt-vendor : get_bt_soc_type"); |
| |
| ret = property_get("qcom.bluetooth.soc", bt_soc_type, NULL); |
| if (ret != 0) { |
| ALOGI("qcom.bluetooth.soc set to %s\n", bt_soc_type); |
| if (!strncasecmp(bt_soc_type, "rome", sizeof("rome"))) { |
| return BT_SOC_ROME; |
| } |
| else if (!strncasecmp(bt_soc_type, "ath3k", sizeof("ath3k"))) { |
| return BT_SOC_AR3K; |
| } |
| else { |
| ALOGI("qcom.bluetooth.soc not set, so using default.\n"); |
| return BT_SOC_DEFAULT; |
| } |
| } |
| else { |
| ALOGE("%s: Failed to get soc type", __FUNCTION__); |
| ret = BT_SOC_DEFAULT; |
| } |
| |
| return ret; |
| } |
| |
| bool can_perform_action(char action) { |
| bool can_perform = false; |
| char ref_count[PROPERTY_VALUE_MAX]; |
| char inProgress[PROPERTY_VALUE_MAX] = {'\0'}; |
| int value, ret; |
| |
| property_get("wc_transport.ref_count", ref_count, "0"); |
| |
| value = atoi(ref_count); |
| ALOGV("%s: ref_count: %s\n",__func__, ref_count); |
| |
| if(action == '1') { |
| ALOGV("%s: on : value is: %d", __func__, value); |
| if(value == 1) |
| { |
| property_get("wc_transport.patch_dnld_inprog", inProgress, "null"); |
| if((is_soc_initialized() == true) || (strcmp(inProgress,"null") != 0)) |
| { |
| value++; |
| ALOGV("%s: on : value is incremented to : %d", __func__, value); |
| } |
| } |
| else |
| { |
| value++; |
| } |
| |
| if (value == 1) |
| can_perform = true; |
| else if (value > 2) |
| return false; |
| } |
| else { |
| ALOGV("%s: off : value is: %d", __func__, value); |
| value--; |
| if (value == 0) |
| can_perform = true; |
| else if (value < 0) |
| return false; |
| } |
| |
| snprintf(ref_count, 3, "%d", value); |
| ALOGV("%s: updated ref_count is: %s", __func__, ref_count); |
| |
| ret = property_set("wc_transport.ref_count", ref_count); |
| if (ret < 0) { |
| ALOGE("%s: Error while updating property: %d\n", __func__, ret); |
| return false; |
| } |
| ALOGV("%s returning %d", __func__, can_perform); |
| return can_perform; |
| } |
| |
| void stop_hci_filter() { |
| char value[PROPERTY_VALUE_MAX] = {'\0'}; |
| ALOGV("%s: Entry ", __func__); |
| |
| property_get(BT_VND_FILTER_START, value, "false"); |
| |
| if (strcmp(value, "false") == 0) { |
| ALOGI("%s: hci_filter has been stopped already", __func__); |
| // return; |
| } |
| |
| property_set(BT_VND_FILTER_START, "false"); |
| property_set("wc_transport.hci_filter_status", "0"); |
| ALOGV("%s: Exit ", __func__); |
| } |
| |
| void start_hci_filter() { |
| ALOGV("%s: Entry ", __func__); |
| int i, init_success = 0; |
| char value[PROPERTY_VALUE_MAX] = {'\0'}; |
| |
| property_get(BT_VND_FILTER_START, value, false); |
| |
| if (strcmp(value, "true") == 0) { |
| ALOGI("%s: hci_filter has been started already", __func__); |
| return; |
| } |
| |
| property_set("wc_transport.hci_filter_status", "0"); |
| property_set(BT_VND_FILTER_START, "true"); |
| |
| ALOGV("%s: %s set to true ", __func__, BT_VND_FILTER_START ); |
| |
| //sched_yield(); |
| for(i=0; i<45; i++) { |
| property_get("wc_transport.hci_filter_status", value, "0"); |
| if (strcmp(value, "1") == 0) { |
| init_success = 1; |
| break; |
| } else { |
| usleep(WAIT_TIMEOUT); |
| } |
| } |
| ALOGV("start_hcifilter status:%d after %f seconds \n", init_success, 0.2*i); |
| |
| ALOGV("%s: Exit ", __func__); |
| } |
| |
| /** Bluetooth Controller power up or shutdown */ |
| static int bt_powerup(int en ) |
| { |
| char rfkill_type[64], *enable_ldo_path = NULL; |
| char type[16], enable_ldo[6]; |
| int fd, size, i, ret, fd_ldo; |
| |
| char disable[PROPERTY_VALUE_MAX]; |
| char state; |
| char on = (en)?'1':'0'; |
| |
| #ifdef WIFI_BT_STATUS_SYNC |
| char wifi_status[PROPERTY_VALUE_MAX]; |
| int lock_fd; |
| #endif /*WIFI_BT_STATUS_SYNC*/ |
| |
| ALOGI("bt_powerup: %c", on); |
| |
| /* Check if rfkill has been disabled */ |
| ret = property_get("ro.rfkilldisabled", disable, "0"); |
| if (!ret ){ |
| ALOGE("Couldn't get ro.rfkilldisabled (%d)", ret); |
| return -1; |
| } |
| /* In case rfkill disabled, then no control power*/ |
| if (strcmp(disable, "1") == 0) { |
| ALOGI("ro.rfkilldisabled : %s", disable); |
| return -1; |
| } |
| |
| #ifdef WIFI_BT_STATUS_SYNC |
| lock_fd = bt_semaphore_create(); |
| bt_semaphore_get(lock_fd); |
| bt_wait_for_service_done(); |
| #endif |
| |
| /* Assign rfkill_id and find bluetooth rfkill state path*/ |
| for(i=0;(rfkill_id == -1) && (rfkill_state == NULL);i++) |
| { |
| snprintf(rfkill_type, sizeof(rfkill_type), "/sys/class/rfkill/rfkill%d/type", i); |
| if ((fd = open(rfkill_type, O_RDONLY)) < 0) |
| { |
| ALOGE("open(%s) failed: %s (%d)\n", rfkill_type, strerror(errno), errno); |
| |
| #ifdef WIFI_BT_STATUS_SYNC |
| bt_semaphore_release(lock_fd); |
| bt_semaphore_destroy(lock_fd); |
| #endif |
| return -1; |
| } |
| |
| size = read(fd, &type, sizeof(type)); |
| close(fd); |
| |
| if ((size >= 9) && !memcmp(type, "bluetooth", 9)) |
| { |
| asprintf(&rfkill_state, "/sys/class/rfkill/rfkill%d/state", rfkill_id = i); |
| break; |
| } |
| } |
| |
| /* Get rfkill State to control */ |
| if (rfkill_state != NULL) |
| { |
| if ((fd = open(rfkill_state, O_RDWR)) < 0) |
| { |
| ALOGE("open(%s) for write failed: %s (%d)",rfkill_state, strerror(errno), errno); |
| #ifdef WIFI_BT_STATUS_SYNC |
| bt_semaphore_release(lock_fd); |
| bt_semaphore_destroy(lock_fd); |
| #endif |
| |
| return -1; |
| } |
| } |
| #ifdef BT_SOC_TYPE_ROME |
| if(can_perform_action(on) == false) { |
| ALOGE("%s:can't perform action as it is being used by other clients", __func__); |
| #ifdef WIFI_BT_STATUS_SYNC |
| bt_semaphore_release(lock_fd); |
| bt_semaphore_destroy(lock_fd); |
| #endif |
| goto done; |
| } |
| #endif |
| ret = asprintf(&enable_ldo_path, "/sys/class/rfkill/rfkill%d/device/extldo", rfkill_id); |
| if( (ret < 0 ) || (enable_ldo_path == NULL) ) |
| { |
| ALOGE("Memory Allocation failure"); |
| return -1; |
| } |
| if ((fd_ldo = open(enable_ldo_path, O_RDWR)) < 0) { |
| ALOGE("open(%s) failed: %s (%d)", enable_ldo_path, strerror(errno), errno); |
| return -1; |
| } |
| size = read(fd_ldo, &enable_ldo, sizeof(enable_ldo)); |
| close(fd_ldo); |
| if (size <= 0) { |
| ALOGE("read(%s) failed: %s (%d)", enable_ldo_path, strerror(errno), errno); |
| return -1; |
| } |
| if (!memcmp(enable_ldo, "true", 4)) { |
| ALOGI("External LDO has been configured"); |
| enable_extldo = TRUE; |
| } |
| |
| ALOGE("Write %c to rfkill\n", on); |
| |
| /* Write value to control rfkill */ |
| if ((size = write(fd, &on, 1)) < 0) { |
| ALOGE("write(%s) failed: %s (%d)",rfkill_state, strerror(errno),errno); |
| #ifdef WIFI_BT_STATUS_SYNC |
| bt_semaphore_release(lock_fd); |
| bt_semaphore_destroy(lock_fd); |
| #endif |
| return -1; |
| } |
| #ifdef BT_SOC_TYPE_ROME |
| if(on == '0'){ |
| ALOGE("Stopping HCI filter as part of CTRL:OFF"); |
| stop_hci_filter(); |
| property_set("wc_transport.soc_initialized", "0"); |
| } |
| #endif |
| #ifdef WIFI_BT_STATUS_SYNC |
| /* query wifi status */ |
| property_get(WIFI_PROP_NAME, wifi_status, ""); |
| |
| ALOGE("bt get wifi status: %s, isInit: %d\n", wifi_status, isInit); |
| |
| /* If wlan driver is not loaded, and bt is changed from off => on */ |
| if (strncmp(wifi_status, "unloaded", strlen("unloaded")) == 0 || strlen(wifi_status) == 0) { |
| if (on == '1') { |
| ALOGI("%s: BT_VND_PWR_ON\n", __func__); |
| if(property_set(SERVICE_PROP_NAME, "load_wlan") < 0) { |
| ALOGE("%s Property setting failed", SERVICE_PROP_NAME); |
| close(fd); |
| bt_semaphore_release(lock_fd); |
| bt_semaphore_destroy(lock_fd); |
| return -1; |
| } |
| } |
| else if (isInit == 0 && on == '0') { |
| ALOGI("%s: BT_VND_PWR_OFF\n", __func__); |
| if(property_set(SERVICE_PROP_NAME, "unbind_hsic") < 0) { |
| ALOGE("%s Property setting failed", SERVICE_PROP_NAME); |
| close(fd); |
| bt_semaphore_release(lock_fd); |
| bt_semaphore_destroy(lock_fd); |
| return -1; |
| } |
| } |
| } |
| |
| if (isInit == 0 && on == '0') |
| property_set(BT_STATUS_NAME, "false"); |
| else if (on == '1') |
| property_set(BT_STATUS_NAME, "true"); |
| |
| bt_semaphore_release(lock_fd); |
| bt_semaphore_destroy(lock_fd); |
| #endif /* WIFI_BT_STATUS_SYNC */ |
| |
| done: |
| if (fd >= 0) |
| close(fd); |
| |
| return 0; |
| } |
| |
| /***************************************************************************** |
| ** |
| ** BLUETOOTH VENDOR INTERFACE LIBRARY FUNCTIONS |
| ** |
| *****************************************************************************/ |
| |
| static int init(const bt_vendor_callbacks_t* p_cb, unsigned char *local_bdaddr) |
| { |
| int i; |
| |
| ALOGI("bt-vendor : init"); |
| |
| if (p_cb == NULL) |
| { |
| ALOGE("init failed with no user callbacks!"); |
| return -1; |
| } |
| |
| if ((btSocType = get_bt_soc_type()) < 0) { |
| ALOGE("%s: Failed to detect BT SOC Type", __FUNCTION__); |
| return -1; |
| } |
| |
| switch(btSocType) |
| { |
| case BT_SOC_ROME: |
| case BT_SOC_AR3K: |
| ALOGI("bt-vendor : Initializing UART transport layer"); |
| userial_vendor_init(); |
| break; |
| case BT_SOC_DEFAULT: |
| break; |
| default: |
| ALOGE("Unknown btSocType: 0x%x", btSocType); |
| break; |
| } |
| |
| /* store reference to user callbacks */ |
| bt_vendor_cbacks = (bt_vendor_callbacks_t *) p_cb; |
| |
| /* Copy BD Address as little-endian byte order */ |
| if(local_bdaddr) |
| for(i=0;i<6;i++) |
| vnd_local_bd_addr[i] = *(local_bdaddr + (5-i)); |
| |
| ALOGI("%s: Local BD Address : %.2x:%.2x:%.2x:%.2x:%.2x:%.2x", __FUNCTION__, |
| vnd_local_bd_addr[0], |
| vnd_local_bd_addr[1], |
| vnd_local_bd_addr[2], |
| vnd_local_bd_addr[3], |
| vnd_local_bd_addr[4], |
| vnd_local_bd_addr[5]); |
| |
| #ifdef WIFI_BT_STATUS_SYNC |
| isInit = 1; |
| #endif /* WIFI_BT_STATUS_SYNC */ |
| |
| return 0; |
| } |
| |
| #ifdef READ_BT_ADDR_FROM_PROP |
| static bool validate_tok(char* bdaddr_tok) { |
| int i = 0; |
| bool ret; |
| |
| if (strlen(bdaddr_tok) != 2) { |
| ret = FALSE; |
| ALOGE("Invalid token length"); |
| } else { |
| ret = TRUE; |
| for (i=0; i<2; i++) { |
| if ((bdaddr_tok[i] >= '0' && bdaddr_tok[i] <= '9') || |
| (bdaddr_tok[i] >= 'A' && bdaddr_tok[i] <= 'F') || |
| (bdaddr_tok[i] >= 'a' && bdaddr_tok[i] <= 'f')) { |
| ret = TRUE; |
| ALOGV("%s: tok %s @ %d is good", __func__, bdaddr_tok, i); |
| } else { |
| ret = FALSE; |
| ALOGE("invalid character in tok: %s at ind: %d", bdaddr_tok, i); |
| break; |
| } |
| } |
| } |
| return ret; |
| } |
| #endif /*READ_BT_ADDR_FROM_PROP*/ |
| |
| int connect_to_local_socket(char* name) { |
| socklen_t len; int sk = -1; |
| |
| ALOGE("%s: ACCEPT ", __func__); |
| sk = socket(AF_LOCAL, SOCK_STREAM, 0); |
| if (sk < 0) { |
| ALOGE("Socket creation failure"); |
| return -1; |
| } |
| |
| if(socket_local_client_connect(sk, name, |
| ANDROID_SOCKET_NAMESPACE_ABSTRACT, SOCK_STREAM) < 0) |
| { |
| ALOGE("failed to connect (%s)", strerror(errno)); |
| close(sk); |
| sk = -1; |
| } else { |
| ALOGE("%s: Connection succeeded\n", __func__); |
| } |
| return sk; |
| } |
| |
| bool is_soc_initialized() { |
| bool init = false; |
| char init_value[PROPERTY_VALUE_MAX]; |
| int ret; |
| |
| ALOGI("bt-vendor : is_soc_initialized"); |
| |
| ret = property_get("wc_transport.soc_initialized", init_value, NULL); |
| if (ret != 0) { |
| ALOGI("wc_transport.soc_initialized set to %s\n", init_value); |
| if (!strncasecmp(init_value, "1", sizeof("1"))) { |
| init = true; |
| } |
| } |
| else { |
| ALOGE("%s: Failed to get wc_transport.soc_initialized", __FUNCTION__); |
| } |
| |
| return init; |
| } |
| |
| |
| /** Requested operations */ |
| static int op(bt_vendor_opcode_t opcode, void *param) |
| { |
| int retval = 0; |
| int nCnt = 0; |
| int nState = -1; |
| bool is_ant_req = false; |
| char wipower_status[PROPERTY_VALUE_MAX]; |
| char emb_wp_mode[PROPERTY_VALUE_MAX]; |
| char bt_version[PROPERTY_VALUE_MAX]; |
| bool ignore_boot_prop = TRUE; |
| #ifdef READ_BT_ADDR_FROM_PROP |
| int i = 0; |
| static char bd_addr[PROPERTY_VALUE_MAX]; |
| uint8_t local_bd_addr_from_prop[6]; |
| char* tok; |
| #endif |
| bool skip_init = true; |
| ALOGV("bt-vendor : op for %d", opcode); |
| |
| switch(opcode) |
| { |
| case BT_VND_OP_POWER_CTRL: |
| { |
| nState = *(int *) param; |
| ALOGI("bt-vendor : BT_VND_OP_POWER_CTRL: %s", |
| (nState == BT_VND_PWR_ON)? "On" : "Off" ); |
| |
| switch(btSocType) |
| { |
| case BT_SOC_DEFAULT: |
| if (readTrpState()) |
| { |
| ALOGI("bt-vendor : resetting BT status"); |
| hw_config(BT_VND_PWR_OFF); |
| } |
| retval = hw_config(nState); |
| if(nState == BT_VND_PWR_ON |
| && retval == 0 |
| && is_hw_ready() == TRUE){ |
| retval = 0; |
| } |
| else { |
| retval = -1; |
| } |
| break; |
| case BT_SOC_ROME: |
| case BT_SOC_AR3K: |
| /* BT Chipset Power Control through Device Tree Node */ |
| retval = bt_powerup(nState); |
| default: |
| break; |
| } |
| } |
| break; |
| |
| case BT_VND_OP_FW_CFG: |
| { |
| // call hciattach to initalize the stack |
| if(bt_vendor_cbacks){ |
| if (btSocType == BT_SOC_ROME) { |
| if (is_soc_initialized()) { |
| ALOGI("Bluetooth FW and transport layer are initialized"); |
| bt_vendor_cbacks->fwcfg_cb(BT_VND_OP_RESULT_SUCCESS); |
| } else { |
| ALOGE("bt_vendor_cbacks is null or SoC not initialized"); |
| ALOGE("Error : hci, smd initialization Error"); |
| retval = -1; |
| } |
| } else { |
| ALOGI("Bluetooth FW and transport layer are initialized"); |
| bt_vendor_cbacks->fwcfg_cb(BT_VND_OP_RESULT_SUCCESS); |
| } |
| } |
| else{ |
| ALOGE("bt_vendor_cbacks is null"); |
| ALOGE("Error : hci, smd initialization Error"); |
| retval = -1; |
| } |
| } |
| break; |
| |
| case BT_VND_OP_SCO_CFG: |
| { |
| if (bt_vendor_cbacks) |
| bt_vendor_cbacks->scocfg_cb(BT_VND_OP_RESULT_SUCCESS); //dummy |
| } |
| break; |
| #ifdef BT_SOC_TYPE_ROME |
| #ifdef ENABLE_ANT |
| case BT_VND_OP_ANT_USERIAL_OPEN: |
| ALOGI("bt-vendor : BT_VND_OP_ANT_USERIAL_OPEN"); |
| is_ant_req = true; |
| //fall through |
| #endif |
| |
| #endif |
| case BT_VND_OP_USERIAL_OPEN: |
| { |
| int (*fd_array)[] = (int (*)[]) param; |
| int idx, fd; |
| ALOGI("bt-vendor : BT_VND_OP_USERIAL_OPEN"); |
| switch(btSocType) |
| { |
| case BT_SOC_DEFAULT: |
| { |
| if(bt_hci_init_transport(pFd) != -1){ |
| int (*fd_array)[] = (int (*) []) param; |
| |
| (*fd_array)[CH_CMD] = pFd[0]; |
| (*fd_array)[CH_EVT] = pFd[0]; |
| (*fd_array)[CH_ACL_OUT] = pFd[1]; |
| (*fd_array)[CH_ACL_IN] = pFd[1]; |
| } |
| else { |
| retval = -1; |
| break; |
| } |
| retval = 2; |
| } |
| break; |
| case BT_SOC_AR3K: |
| { |
| fd = userial_vendor_open((tUSERIAL_CFG *) &userial_init_cfg); |
| if (fd != -1) { |
| for (idx=0; idx < CH_MAX; idx++) |
| (*fd_array)[idx] = fd; |
| retval = 1; |
| } |
| else { |
| retval = -1; |
| break; |
| } |
| |
| /* Vendor Specific Process should happened during userial_open process |
| After userial_open, rx read thread is running immediately, |
| so it will affect VS event read process. |
| */ |
| if(ath3k_init(fd,3000000,115200,NULL,&vnd_userial.termios)<0) |
| retval = -1; |
| } |
| break; |
| case BT_SOC_ROME: |
| { |
| wait_for_patch_download(is_ant_req); |
| property_get("ro.bluetooth.emb_wp_mode", emb_wp_mode, false); |
| if (!is_soc_initialized()) { |
| char* dlnd_inprog = is_ant_req ? "ant" : "bt"; |
| if (property_set("wc_transport.patch_dnld_inprog", dlnd_inprog) < 0) { |
| ALOGE("%s: Failed to set dnld_inprog %s", __FUNCTION__, dlnd_inprog); |
| } |
| |
| fd = userial_vendor_open((tUSERIAL_CFG *) &userial_init_cfg); |
| if (fd < 0) { |
| ALOGE("userial_vendor_open returns err"); |
| retval = -1; |
| } else { |
| /* Clock on */ |
| userial_clock_operation(fd, USERIAL_OP_CLK_ON); |
| ALOGD("userial clock on"); |
| if(strcmp(emb_wp_mode, "true") == 0) { |
| property_get("ro.bluetooth.wipower", wipower_status, false); |
| if(strcmp(wipower_status, "true") == 0) { |
| check_embedded_mode(fd); |
| } else { |
| ALOGI("Wipower not enabled"); |
| } |
| } |
| ALOGV("rome_soc_init is started"); |
| property_set("wc_transport.soc_initialized", "0"); |
| #ifdef READ_BT_ADDR_FROM_PROP |
| /*Give priority to read BD address from boot property*/ |
| ignore_boot_prop = FALSE; |
| if (property_get(BLUETOOTH_MAC_ADDR_BOOT_PROPERTY, bd_addr, NULL)) { |
| ALOGV("BD address read from Boot property: %s\n", bd_addr); |
| tok = strtok(bd_addr, ":"); |
| while (tok != NULL) { |
| ALOGV("bd add [%d]: %d ", i, strtol(tok, NULL, 16)); |
| if (i>=6) { |
| ALOGE("bd property of invalid length"); |
| ignore_boot_prop = TRUE; |
| break; |
| } |
| if (!validate_tok(tok)) { |
| ALOGE("Invalid token in BD address"); |
| ignore_boot_prop = TRUE; |
| break; |
| } |
| local_bd_addr_from_prop[5-i] = strtol(tok, NULL, 16); |
| tok = strtok(NULL, ":"); |
| i++; |
| } |
| if (i == 6 && !ignore_boot_prop) { |
| ALOGV("Valid BD address read from prop"); |
| memcpy(vnd_local_bd_addr, local_bd_addr_from_prop, sizeof(vnd_local_bd_addr)); |
| ignore_boot_prop = FALSE; |
| } else { |
| ALOGE("There are not enough tokens in BD addr"); |
| ignore_boot_prop = TRUE; |
| } |
| } else { |
| ALOGE("BD address boot property not set"); |
| ignore_boot_prop = TRUE; |
| } |
| #endif //READ_BT_ADDR_FROM_PROP |
| /* Always read BD address from NV file */ |
| if(ignore_boot_prop && !bt_vendor_nv_read(1, vnd_local_bd_addr)) |
| { |
| /* Since the BD address is configured in boot time We should not be here */ |
| ALOGI("Failed to read BD address. Use the one from bluedroid stack/ftm"); |
| } |
| if(rome_soc_init(fd,vnd_local_bd_addr)<0) { |
| retval = -1; |
| userial_clock_operation(fd, USERIAL_OP_CLK_OFF); |
| } else { |
| ALOGV("rome_soc_init is completed"); |
| property_set("wc_transport.soc_initialized", "1"); |
| userial_clock_operation(fd, USERIAL_OP_CLK_OFF); |
| skip_init = false; |
| /*Close the UART port*/ |
| close(fd); |
| } |
| } |
| } |
| if (property_set("wc_transport.patch_dnld_inprog", "null") < 0) { |
| ALOGE("%s: Failed to set property", __FUNCTION__); |
| } |
| |
| property_set("wc_transport.clean_up","0"); |
| if (retval != -1) { |
| #ifdef BT_SOC_TYPE_ROME |
| start_hci_filter(); |
| if (is_ant_req) { |
| ALOGV("connect to ant channel"); |
| ant_fd = fd = connect_to_local_socket("ant_sock"); |
| } |
| else |
| #endif |
| { |
| ALOGV("connect to bt channel"); |
| vnd_userial.fd = fd = connect_to_local_socket("bt_sock"); |
| } |
| |
| if (fd != -1) { |
| ALOGV("%s: received the socket fd: %d is_ant_req: %d\n", |
| __func__, fd, is_ant_req); |
| if((strcmp(emb_wp_mode, "true") == 0) && !is_ant_req) { |
| if (rome_ver >= ROME_VER_3_0) { |
| /* get rome supported feature request */ |
| ALOGE("%s: %x08 %0x", __FUNCTION__,rome_ver, ROME_VER_3_0); |
| rome_get_addon_feature_list(fd); |
| } |
| } |
| if (!skip_init) { |
| /*Skip if already sent*/ |
| enable_controller_log(fd, is_ant_req); |
| skip_init = true; |
| } |
| for (idx=0; idx < CH_MAX; idx++) |
| (*fd_array)[idx] = fd; |
| retval = 1; |
| } |
| else { |
| retval = -1; |
| } |
| } else { |
| if (fd >= 0) |
| close(fd); |
| } |
| } |
| break; |
| default: |
| ALOGE("Unknown btSocType: 0x%x", btSocType); |
| break; |
| } |
| } |
| break; |
| #ifdef BT_SOC_TYPE_ROME |
| #ifdef ENABLE_ANT |
| case BT_VND_OP_ANT_USERIAL_CLOSE: |
| { |
| ALOGI("bt-vendor : BT_VND_OP_ANT_USERIAL_CLOSE"); |
| property_set("wc_transport.clean_up","1"); |
| if (ant_fd != -1) { |
| ALOGE("closing ant_fd"); |
| close(ant_fd); |
| ant_fd = -1; |
| } |
| } |
| break; |
| #endif |
| #endif |
| case BT_VND_OP_USERIAL_CLOSE: |
| { |
| ALOGI("bt-vendor : BT_VND_OP_USERIAL_CLOSE btSocType: %d", btSocType); |
| switch(btSocType) |
| { |
| case BT_SOC_DEFAULT: |
| bt_hci_deinit_transport(pFd); |
| break; |
| |
| case BT_SOC_ROME: |
| case BT_SOC_AR3K: |
| property_set("wc_transport.clean_up","1"); |
| userial_vendor_close(); |
| break; |
| default: |
| ALOGE("Unknown btSocType: 0x%x", btSocType); |
| break; |
| } |
| } |
| break; |
| |
| case BT_VND_OP_GET_LPM_IDLE_TIMEOUT: |
| if (btSocType == BT_SOC_AR3K) { |
| uint32_t *timeout_ms = (uint32_t *) param; |
| *timeout_ms = 1000; |
| } |
| break; |
| |
| case BT_VND_OP_LPM_SET_MODE: |
| if(btSocType == BT_SOC_AR3K) { |
| uint8_t *mode = (uint8_t *) param; |
| |
| if (*mode) { |
| lpm_set_ar3k(UPIO_LPM_MODE, UPIO_ASSERT, 0); |
| } |
| else { |
| lpm_set_ar3k(UPIO_LPM_MODE, UPIO_DEASSERT, 0); |
| } |
| if (bt_vendor_cbacks ) |
| bt_vendor_cbacks->lpm_cb(BT_VND_OP_RESULT_SUCCESS); |
| } |
| else { |
| // respond with failure as it's already handled by other mechanism |
| if (bt_vendor_cbacks) |
| bt_vendor_cbacks->lpm_cb(BT_VND_OP_RESULT_FAIL); |
| } |
| break; |
| |
| case BT_VND_OP_LPM_WAKE_SET_STATE: |
| { |
| switch(btSocType) |
| { |
| case BT_SOC_ROME: |
| { |
| uint8_t *state = (uint8_t *) param; |
| uint8_t wake_assert = (*state == BT_VND_LPM_WAKE_ASSERT) ? \ |
| BT_VND_LPM_WAKE_ASSERT : BT_VND_LPM_WAKE_DEASSERT; |
| |
| if (wake_assert == 0) |
| ALOGV("ASSERT: Waking up BT-Device"); |
| else if (wake_assert == 1) |
| ALOGV("DEASSERT: Allowing BT-Device to Sleep"); |
| |
| #ifdef QCOM_BT_SIBS_ENABLE |
| if(bt_vendor_cbacks){ |
| ALOGI("Invoking HCI H4 callback function"); |
| bt_vendor_cbacks->lpm_set_state_cb(wake_assert); |
| } |
| #endif |
| } |
| break; |
| case BT_SOC_AR3K: |
| { |
| uint8_t *state = (uint8_t *) param; |
| uint8_t wake_assert = (*state == BT_VND_LPM_WAKE_ASSERT) ? \ |
| UPIO_ASSERT : UPIO_DEASSERT; |
| lpm_set_ar3k(UPIO_BT_WAKE, wake_assert, 0); |
| } |
| case BT_SOC_DEFAULT: |
| break; |
| default: |
| ALOGE("Unknown btSocType: 0x%x", btSocType); |
| break; |
| } |
| } |
| break; |
| case BT_VND_OP_EPILOG: |
| { |
| #if (HW_NEED_END_WITH_HCI_RESET == FALSE) |
| if (bt_vendor_cbacks) |
| { |
| bt_vendor_cbacks->epilog_cb(BT_VND_OP_RESULT_SUCCESS); |
| } |
| #else |
| switch(btSocType) |
| { |
| case BT_SOC_ROME: |
| { |
| char value[PROPERTY_VALUE_MAX] = {'\0'}; |
| property_get("wc_transport.hci_filter_status", value, "0"); |
| if(is_soc_initialized()&& (strcmp(value,"1") == 0)) |
| { |
| hw_epilog_process(); |
| } |
| else |
| { |
| if (bt_vendor_cbacks) |
| { |
| ALOGE("vendor lib epilog process aborted"); |
| bt_vendor_cbacks->epilog_cb(BT_VND_OP_RESULT_SUCCESS); |
| } |
| } |
| } |
| break; |
| default: |
| hw_epilog_process(); |
| break; |
| } |
| #endif |
| } |
| break; |
| case BT_VND_OP_GET_LINESPEED: |
| { |
| retval = -1; |
| switch(btSocType) |
| { |
| case BT_SOC_ROME: |
| if(!is_soc_initialized()) { |
| ALOGE("BT_VND_OP_GET_LINESPEED: error" |
| " - transport driver not initialized!"); |
| }else { |
| retval = 3000000; |
| } |
| break; |
| default: |
| retval = userial_vendor_get_baud(); |
| break; |
| } |
| break; |
| } |
| } |
| |
| return retval; |
| } |
| |
| static void ssr_cleanup(int reason) { |
| int pwr_state=BT_VND_PWR_OFF; |
| int ret; |
| unsigned char trig_ssr = 0xEE; |
| ALOGI("ssr_cleanup"); |
| if (property_set("wc_transport.patch_dnld_inprog", "null") < 0) { |
| ALOGE("%s: Failed to set property", __FUNCTION__); |
| } |
| |
| if ((btSocType = get_bt_soc_type()) < 0) { |
| ALOGE("%s: Failed to detect BT SOC Type", __FUNCTION__); |
| return -1; |
| } |
| |
| if (btSocType == BT_SOC_ROME) { |
| #ifdef BT_SOC_TYPE_ROME |
| #ifdef ENABLE_ANT |
| //Indicate to filter by sending |
| //special byte |
| if (reason == CMD_TIMEOUT) { |
| trig_ssr = 0xEE; |
| ret = write (vnd_userial.fd, &trig_ssr, 1); |
| ALOGI("Trig_ssr is being sent to BT socket, retval(%d) :errno: %s", ret, strerror(errno)); |
| return; |
| } |
| /*Close both ANT channel*/ |
| op(BT_VND_OP_ANT_USERIAL_CLOSE, NULL); |
| #endif |
| #endif |
| /*Close both ANT channel*/ |
| op(BT_VND_OP_USERIAL_CLOSE, NULL); |
| /*CTRL OFF twice to make sure hw |
| * turns off*/ |
| #ifdef ENABLE_ANT |
| op(BT_VND_OP_POWER_CTRL, &pwr_state); |
| #endif |
| |
| } |
| #ifdef BT_SOC_TYPE_ROME |
| /*Generally switching of chip should be enough*/ |
| op(BT_VND_OP_POWER_CTRL, &pwr_state); |
| #endif |
| } |
| |
| |
| /** Closes the interface */ |
| static void cleanup( void ) |
| { |
| ALOGI("cleanup"); |
| bt_vendor_cbacks = NULL; |
| |
| #ifdef WIFI_BT_STATUS_SYNC |
| isInit = 0; |
| #endif /* WIFI_BT_STATUS_SYNC */ |
| } |
| |
| /* Check for one of the cients ANT/BT patch download is already in |
| ** progress if yes wait till complete |
| */ |
| void wait_for_patch_download(bool is_ant_req) { |
| ALOGV("%s:", __FUNCTION__); |
| char inProgress[PROPERTY_VALUE_MAX] = {'\0'}; |
| while (1) { |
| property_get("wc_transport.patch_dnld_inprog", inProgress, "null"); |
| |
| if(is_ant_req && !strcmp(inProgress,"bt") ) { |
| //ANT request, wait for BT to finish |
| usleep(50000); |
| } |
| else if(!is_ant_req && !strcmp(inProgress,"ant") ) { |
| //BT request, wait for ANT to finish |
| usleep(50000); |
| } |
| else { |
| ALOGI("%s: patch download completed", __FUNCTION__); |
| break; |
| } |
| } |
| } |
| |
| // Entry point of DLib |
| const bt_vendor_interface_t BLUETOOTH_VENDOR_LIB_INTERFACE = { |
| sizeof(bt_vendor_interface_t), |
| init, |
| op, |
| cleanup, |
| ssr_cleanup |
| }; |