| # inherit from the proprietary version |
| -include vendor/oppo/find7a/BoardConfigVendor.mk |
| |
| TARGET_NO_BOOTLOADER := true |
| TARGET_BOOTLOADER_BOARD_NAME := find7a |
| TARGET_OTA_ASSERT_DEVICE := find7a |
| |
| # Platform |
| TARGET_BOARD_PLATFORM := msm8974 |
| TARGET_BOARD_PLATFORM_GPU := qcom-adreno300 |
| |
| # Architecture |
| TARGET_GLOBAL_CFLAGS += -mfpu=neon -mfloat-abi=softfp |
| TARGET_GLOBAL_CPPFLAGS += -mfpu=neon -mfloat-abi=softfp |
| TARGET_CPU_VARIANT := krait |
| TARGET_CPU_ABI := armeabi-v7a |
| TARGET_CPU_ABI2 := armeabi |
| TARGET_ARCH := arm |
| TARGET_ARCH_VARIANT := armv7-a-neon |
| TARGET_CPU_SMP := true |
| ARCH_ARM_HAVE_TLS_REGISTER := true |
| |
| # Krait optimizations |
| TARGET_USE_KRAIT_BIONIC_OPTIMIZATION := true |
| TARGET_USE_KRAIT_PLD_SET := true |
| TARGET_KRAIT_BIONIC_PLDOFFS := 10 |
| TARGET_KRAIT_BIONIC_PLDTHRESH := 10 |
| TARGET_KRAIT_BIONIC_BBTHRESH := 64 |
| TARGET_KRAIT_BIONIC_PLDSIZE := 64 |
| |
| BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.selinux=permissive androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 |
| BOARD_KERNEL_BASE := 0x80200000 |
| #BOARD_FORCE_RAMDISK_ADDRESS := 0x05000000 |
| BOARD_KERNEL_PAGESIZE := 2048 |
| BOARD_MKBOOTIMG_ARGS := --ramdisk_offset 0x02000000 |
| BOARD_CUSTOM_BOOTIMG_MK := device/oppo/find7a/mkbootimg.mk |
| |
| BOARD_BOOTIMAGE_PARTITION_SIZE := 0x00F00000 |
| BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x00F00000 |
| BOARD_SYSTEMIMAGE_PARTITION_SIZE := 805306368 |
| BOARD_USERDATAIMAGE_PARTITION_SIZE := 5100273664 |
| BOARD_FLASH_BLOCK_SIZE := 131072 |
| |
| # global |
| TARGET_SPECIFIC_HEADER_PATH := device/oppo/find7a/include |
| BOARD_USES_QCOM_HARDWARE := true |
| TARGET_USES_QCOM_BSP := true |
| COMMON_GLOBAL_CFLAGS += -DQCOM_HARDWARE -DQCOM_BSP |
| |
| # Display |
| TARGET_QCOM_DISPLAY_VARIANT := caf |
| USE_OPENGL_RENDERER := true |
| TARGET_USES_ION := true |
| TARGET_USES_C2D_COMPOSITION := true |
| NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3 |
| |
| # Audio/media |
| BOARD_USES_ALSA_AUDIO:= true |
| TARGET_QCOM_AUDIO_VARIANT := caf |
| BOARD_HAVE_LOW_LATENCY_AUDIO := true |
| TARGET_QCOM_MEDIA_VARIANT := caf |
| BOARD_USES_FLUENCE_INCALL := true |
| BOARD_USES_FLUENCE_FOR_VOIP := true |
| # maxwen: this is actually only needed because |
| # of a bug in audio-caf when BOARD_USES_FLUENCE_INCALL := true |
| # to enter the default else path |
| BOARD_USES_SEPERATED_AUDIO_INPUT := true |
| BOARD_USES_SEPERATED_VOICE_SPEAKER := true |
| BOARD_HAVE_NEW_QCOM_CSDCLIENT := true |
| BOARD_USES_SEPERATED_HEADSET_MIC := true |
| |
| # Camera |
| COMMON_GLOBAL_CFLAGS += -DNEEDS_VECTORIMPL_SYMBOLS |
| USE_DEVICE_SPECIFIC_CAMERA := true |
| |
| # Disable secure discard because it's SLOW |
| BOARD_SUPPRESS_SECURE_ERASE := true |
| |
| # Bluetooth |
| BOARD_HAVE_BLUETOOTH := true |
| BOARD_HAVE_BLUETOOTH_QCOM := true |
| BLUETOOTH_HCI_USE_MCT := true |
| BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/oppo/find7a/bluetooth |
| |
| # Wifi |
| BOARD_HAS_QCOM_WLAN := true |
| BOARD_WLAN_DEVICE := qcwcn |
| WPA_SUPPLICANT_VERSION := VER_0_8_X |
| BOARD_WPA_SUPPLICANT_DRIVER := NL80211 |
| BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) |
| BOARD_HOSTAPD_DRIVER := NL80211 |
| BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) |
| WIFI_DRIVER_FW_PATH_STA := "sta" |
| WIFI_DRIVER_FW_PATH_AP := "ap" |
| WIFI_DRIVER_MODULE_PATH := "/system/lib/modules/wlan.ko" |
| WIFI_DRIVER_MODULE_NAME := "wlan" |
| |
| BOARD_EGL_CFG := device/oppo/find7a/configs/egl.cfg |
| |
| # Compatibility with pre-kitkat Qualcomm sensor HALs |
| SENSORS_NEED_SETRATE_ON_ENABLE := true |
| |
| #TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/class/android_usb/android0/f_mass_storage/lun%d/file |
| |
| # Recovery:Start |
| |
| TARGET_RECOVERY_FSTAB := device/oppo/find7a/configs/fstab.find7a |
| |
| # Use this flag if the board has a ext4 partition larger than 2gb |
| BOARD_HAS_LARGE_FILESYSTEM := true |
| TARGET_USERIMAGES_USE_EXT4 := true |
| |
| # TWRP specific build flags |
| DEVICE_RESOLUTION := 1080x1920 |
| RECOVERY_GRAPHICS_USE_LINELENGTH := true |
| TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888" |
| TW_NO_USB_STORAGE := true |
| TW_INCLUDE_JB_CRYPTO := true |
| TW_NO_SCREEN_BLANK := true |